{"product_id":"samsung-galaxy-c9-pro-replacement-battery-385v-4000mah-li-polymer","title":"Samsung Galaxy C9 Pro EB-BC900ABE Replacement Battery 3.85V 4000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung Galaxy C9 Pro — 3.85V Li-Polymer Replacement Battery (EB-BC900ABE)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.85V, 4000mAh Li-Polymer battery for the Samsung Galaxy C9 Pro, Galaxy C9 Pro Duos, Galaxy C9 Pro Duos TD-LTE, and SM-C9000. It replaces OEM part numbers EB-BC900ABE and EB-BC900ABA. Physical dimensions are 110.60 × 51.30 × 3.90mm — confirm clearance before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eC9 Pro and Duos variant fit:\u003c\/strong\u003e\n    The C9 Pro, C9 Pro Duos, and C9 Pro Duos TD-LTE share the same battery bay dimensions, connector pinout, and BMS handshake protocol — all three accept this cell without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this battery through charge and discharge cycles on C9 Pro hardware. The BMS communicated correctly with the charge IC, accepted Samsung's fast-charge protocol on cycle two, and held voltage above the cutoff threshold under display and modem load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle fuel gauge calibration:\u003c\/strong\u003e\n    On first use after installation, disable fast charging and run one full discharge-to-charge cycle. This lets the fuel gauge IC map the new cell's discharge curve before the coulomb counter locks in its reference points — skipping this step causes erratic percentage readings early on.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage-cliff problem, not a capacity problem. When the modem transmits or the screen runs at full brightness, current draw spikes sharply. If the fuel gauge IC is still calibrated to the old cell's discharge curve, it misreads the remaining voltage — the phone thinks it has 25% left, but the cell is already near its low-voltage cutoff. The processor receives a hard shutoff signal from the PMIC before the OS can show a warning. One complete discharge cycle with fast charging off corrects the coulomb counter reference and eliminates most of these shutdowns.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone not powering on after the battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells discharge slowly in storage — if the voltage drops below approximately 2.5V per cell, the BMS enters lockout mode and blocks charging to prevent thermal runaway on a deeply discharged cell. The phone shows nothing when plugged in: no charging animation, no boot screen. Connect the phone to a wall adapter rated at 5V\/2A and leave it for 20–40 minutes without pressing anything — the charge IC applies a trickle current that slowly recovers cell voltage back above the BMS unlock threshold. Once the charging animation appears, resume normal charging.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43392078512218,"sku":"BWCS-SMC900XL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43392078544986,"sku":"BWCS-SMC900XL-2","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43392078577754,"sku":"BWCS-SMC900XL-3","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SMC900XL-1.webp?v=1779143639","url":"https:\/\/batteryweb.com\/products\/samsung-galaxy-c9-pro-replacement-battery-385v-4000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}