{"product_id":"samsung-galaxy-tab-replacement-battery-37v-4000mah-li-polymer","title":"Samsung Galaxy Tab Replacement Battery SP4960C3A 3.7V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung Galaxy Tab GT-P1000 Series — 3.7V Li-Polymer Replacement Battery (SP4960C3A)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 4000mAh Li-Polymer cell replaces the original SP4960C3A battery in the Samsung Galaxy Tab GT-P1000, including the 16GB and 32GB variants. It powers the display, processor, and all internal components. Fit the new cell when the original no longer holds a charge or the tablet dies far above 0%.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGT-P1000 platform compatibility:\u003c\/strong\u003e\n    The GT-P1000, GT-P1000 16GB, and GT-P1000 32GB all share the same battery bay dimensions and connector pinout. The BMS handshake runs on the same voltage rail across this series, so one cell covers all three storage variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the GT-P1000 platform. The BMS accepted the cell without error flags, charge termination triggered correctly at 4.2V, and the protection circuit tripped as expected at the low-voltage cutoff threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    After fitting this cell, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without using the device. The GT-P1000's fuel gauge IC calibrated itself to the old cell's degraded profile — one full cycle resets it against the new 4000mAh cell and clears inaccurate percentage readings.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSamsung Galaxy Tab GT-P1000 shutting down at 15–25% remaining\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the GT-P1000 runs the display at full brightness alongside active WiFi, combined current draw accelerates voltage sag in the final 20% of the capacity curve. If the cell voltage drops below the BMS cutoff threshold faster than the fuel gauge expects, the tablet interprets a safe remaining percentage as an emergency low-voltage condition and shuts down. Fitting a fresh 4000mAh cell reduces voltage sag under that combined load. After installation, complete one full discharge-to-shutoff cycle so the fuel gauge recalibrates the sag curve against the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eGT-P1000 fast charging not available after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe GT-P1000's charge IC negotiates charge rate with the charger on the first accepted cycle after a new cell is detected. Until that cycle completes, the controller may default to a conservative charge current rather than the higher rate the original charger supports. Connect the tablet to the original Samsung charger and allow it to charge fully without interruption. Once that first full cycle completes, the charge IC locks in the negotiated rate and faster charging resumes on subsequent cycles.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426101231706,"sku":"BWCS-SGP100SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426101264474,"sku":"BWCS-SGP100SL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426101297242,"sku":"BWCS-SGP100SL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SGP100SL-1.webp?v=1779930385","url":"https:\/\/batteryweb.com\/products\/samsung-galaxy-tab-replacement-battery-37v-4000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}