{"product_id":"samsung-galaxy-watch-42mm-replacement-battery-385v-250mah-li-polymer","title":"Samsung Galaxy Watch 42mm EB-BR170ABU Replacement Battery 3.85V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung Galaxy Watch 42mm — 3.85V Li-Polymer Replacement Battery (EB-BR170ABU)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.85V, 250mAh Li-Polymer cell for the Samsung Galaxy Watch 42mm, covering SM-R810 and SM-R815 variants. It replaces the original cell when the watch no longer holds a multi-day charge or drops to zero percent shortly after being unplugged. Dimensions are 24.40 × 22.15 × 4.90mm — match these before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSM-R810 and SM-R815 compatibility:\u003c\/strong\u003e\n    Both the Wi-Fi (SM-R810) and LTE (SM-R815) Galaxy Watch 42mm variants run the same voltage rail and use the same connector footprint, so this single cell covers both. The BMS on each model handshakes at 3.85V nominal — this cell meets that spec.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the SM-R810 platform. The BMS accepted the cell without fault flags, and the fuel gauge IC responded normally through a full charge cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge calibration after swap:\u003c\/strong\u003e\n    After fitting this cell, place the watch on its magnetic charger immediately and charge to 100% before first use. The fuel gauge IC on the Galaxy Watch platform loses its reference when the cell is removed — it cannot calibrate the state-of-charge correctly without one full charge cycle from near-zero after reassembly.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Galaxy Watch 42mm reports 0% immediately after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Galaxy Watch 42mm uses a coulomb-counting fuel gauge IC that tracks charge state relative to a stored reference. When you disconnect the original cell, that reference resets to zero. The watch has no way to know the new cell's actual state, so it reports 0% until a calibration cycle completes. This is not a fault with the replacement cell. Place the watch on charge immediately after reassembly and let it reach 100% — the gauge will re-anchor its reference at full charge and read accurately from that point forward.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery draining in one day instead of the expected multi-day use\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the watch is burning through charge far faster than expected after a swap, check whether always-on display and continuous heart rate monitoring are both active — together they are the two highest sustained draws on this 250mAh cell. The new cell's internal impedance differs slightly from a worn cell, and the power management IC adjusts over the first several charge cycles. If drain is still abnormal after five full cycles, check that the battery connector is fully seated, as a loose contact causes the BMS to draw compensation current continuously. A fully seated connector measures stable voltage at the pads with no fluctuation above 3.85V at rest.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416165646426,"sku":"BWCS-SMR810SH-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416165679194,"sku":"BWCS-SMR810SH-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416165711962,"sku":"BWCS-SMR810SH-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SMR810SH-1.webp?v=1779760565","url":"https:\/\/batteryweb.com\/products\/samsung-galaxy-watch-42mm-replacement-battery-385v-250mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}