{"product_id":"samsung-galaxy-watch-7-ultra-47mm-replacement-battery-388v-570mah-li-polymer","title":"Samsung Galaxy Watch 7 Ultra 47mm EB-BL705ABY Compatible Battery 3.88V 570mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung Galaxy Watch 7 Ultra 47mm — 3.88V Li-Polymer Replacement Battery (EB-BL705ABY)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 570mAh Li-Polymer cell at 3.88V, replacing the original EB-BL705ABY in the Samsung Galaxy Watch 7 Ultra 47mm. It fits SM-L705F, SM-L705N, and the Galaxy Watch Ultra 2025 47mm. Swap it when the original cell no longer holds charge, drops capacity noticeably, or fails to power the watch at all.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSM-L705 platform fit:\u003c\/strong\u003e\n    The SM-L705F and SM-L705N share the same battery bay geometry, connector pitch, and BMS handshake protocol — one cell covers both variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We seated this cell in an SM-L705F chassis and confirmed the BMS accepted the new cell reference, cleared prior fault flags, and held stable voltage under continuous heart rate and GPS load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge IC reset after swap:\u003c\/strong\u003e\n    Place the watch on its magnetic charger immediately after fitting this cell and charge it to 100% before first use. The fuel gauge IC on the Watch 7 Ultra cannot set an accurate capacity reference without one full charge cycle from near-zero following a cell change. Skipping this step causes the percentage readout to read incorrectly for days.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy always-on display and continuous HR monitoring hit a 570mAh cell hard\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Galaxy Watch 7 Ultra runs a high-resolution AMOLED panel, a continuous optical HR sensor, and background BLE sync simultaneously. That combined draw is significant against a 570mAh cell — this is by design, not a fault. Always-on display mode alone can account for a substantial portion of daily draw. Turning AOD off or reducing HR sample rate in the Galaxy Wearable app directly reduces current demand and extends the time between charges.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWatch not pairing to phone after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eRemoving the battery cuts all power to the BLE radio, which drops the active encrypted session the watch holds with the Galaxy Wearable app. The phone retains the old session key, and the watch boots with no matching session — they can't re-establish automatically. Open the Galaxy Wearable app on the phone, go to Watch Settings, and select \"Disconnect and Unpair.\" Then re-pair from scratch. The new session negotiates cleanly and pairing completes at standard BLE 4.2 handshake speed.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43303976697946,"sku":"BWCS-SML700SH-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43303976730714,"sku":"BWCS-SML700SH-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43303976763482,"sku":"BWCS-SML700SH-3","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SML700SH_1.webp?v=1777520734","url":"https:\/\/batteryweb.com\/products\/samsung-galaxy-watch-7-ultra-47mm-replacement-battery-388v-570mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}