{"product_id":"samsung-galaxy-xcover-6-pro-replacement-battery-385v-3200mah-li-polymer","title":"Samsung Galaxy Xcover 6 Pro EB-BG736BBE Compatible Battery 3200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung Galaxy Xcover 6 Pro — 3.85V Li-Polymer Replacement Battery (EB-BG736BBE)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.85V, 3200mAh Li-Polymer replacement battery for the Samsung Galaxy Xcover 6 Pro. It fits SM-G736U, SM-G736U1, SM-G736B, and related variants using OEM part number EB-BG736BBE. The Xcover 6 Pro is a rugged smartphone rated for dust and water exposure, and its battery takes harder daily punishment than a standard consumer handset.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXcover 6 Pro series fit:\u003c\/strong\u003e\n    The SM-G736 variants share the same battery bay dimensions, connector pinout, and BMS handshake protocol. All listed models accept the EB-BG736BBE cell without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge acceptance, BMS cutoff triggers, and protection circuit response on an SM-G736B. The cell held charge correctly and the BMS responded normally to both standard and fast-charge current.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first use after installation, disable fast charging and run one complete discharge-charge cycle at standard current. This lets the fuel gauge IC map the new cell's discharge curve before fast charge pushes higher current into an uncalibrated cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Xcover 6 Pro after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA new cell has a slightly different internal resistance curve than the original. When the modem fires up during a call or the screen brightness spikes, current draw climbs fast. If the fuel gauge IC is still calibrated to the old cell, it reads 25% remaining while the actual cell voltage has already dropped below the system's cutoff threshold. The phone shuts down to protect the hardware, not because the battery is failing. One full discharge-charge cycle at standard rate recalibrates the coulomb counter and eliminates most of these shutdowns. After calibration, the cutoff should no longer trigger above 3.5V under normal load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eUSB-PD fast charge not accepted on the first cycle after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eAfter a cell swap, the charge IC on the Xcover 6 Pro sometimes falls back to standard 5V charging on the first cycle. This happens because the BMS on a new cell reports an impedance state the fast-charge negotiation logic treats as out-of-range during initialisation. It is not a fault — it resolves after one full charge at standard rate. On the next plug-in, fast charge re-negotiates correctly. If fast charge still does not engage after two full cycles, check the USB-C port for debris before assuming a BMS issue.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391831769178,"sku":"BWCS-SMG736SL-1","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391831801946,"sku":"BWCS-SMG736SL-2","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391831834714,"sku":"BWCS-SMG736SL-3","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SMG736SL_1.webp?v=1779142282","url":"https:\/\/batteryweb.com\/products\/samsung-galaxy-xcover-6-pro-replacement-battery-385v-3200mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}