{"product_id":"samsung-nbe60-replacement-battery-6v-2100mah-ni-mh","title":"Samsung NBE60 Replacement Battery 6V 2100mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung NBE60 \/ NC240 \/ SCA Series — 6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V, 2100mAh (12.6Wh) Ni-MH replacement battery for Samsung digital cameras including the NBE60, NC240, SCA12, and SCA20, plus 61 additional compatible models. It matches the original cell's voltage and chemistry, slotting into the battery compartment without modification. Capacity figures are taken directly from product data — not estimated from third-party sources.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNBE60, NC240, and SCA-series compatibility:\u003c\/strong\u003e\n    These models share the same 6V battery bay, connector pinout, and BMS communication protocol. One cell spec covers the full group without adaptation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on camera-compatible equipment. The BMS accepted the cell without fault codes, and voltage held stable across the discharge curve under standard shooting draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge via OEM charger or camera body:\u003c\/strong\u003e\n    Some Samsung camera BMS systems require the initial charge to originate inside the camera body or OEM charger — not a third-party dock — to calibrate the battery-remaining display correctly. Run one full charge cycle this way before heavy use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera showing dead battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eSamsung camera battery indicators map voltage thresholds to a percentage or icon scale calibrated to the original cell's discharge curve. A new Ni-MH cell often sits at a mid-point charge when it arrives, not a full charge. The camera reads the voltage, compares it against its internal map, and flags it as critically low or dead — even though the cell has usable capacity remaining. Run one full charge cycle in the camera body or OEM charger first; the indicator should read accurately from around 7.4V at full charge down through the discharge range.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash not fully recycling between shots after extended use\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eFlash recycle time depends on the capacitor recharging quickly between frames, which draws a sharp current spike from the battery. As the cell approaches the end of its charge, internal resistance climbs and the current available for capacitor recharge drops. This shows up as longer recycle gaps and, eventually, noticeably dimmer flash output. If recycle time increases mid-shoot, check the battery voltage — below approximately 5.4V under load, the cell cannot sustain full capacitor recharge current and should be swapped or recharged before continuing.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333895913562,"sku":"BWCS-NP55-1","price":35.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43333895946330,"sku":"BWCS-NP55-2","price":41.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43333895979098,"sku":"BWCS-NP55-3","price":45.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP55-1.webp?v=1778213590","url":"https:\/\/batteryweb.com\/products\/samsung-nbe60-replacement-battery-6v-2100mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}