{"product_id":"samsung-scl810-replacement-battery-74v-3700mah-li-ion","title":"Samsung SB-L160 Replacement Battery 7.4V 3700mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung SCL810 \/ SCL860 Series — 7.4V Li-ion Replacement Battery (SB-L160)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V, 3700mAh Li-ion cell replaces the OEM SB-L160, SB-L110A, and SB-L320 batteries. It fits the Samsung SCL810, SCL860, SCL870, SCL901, and more than two dozen additional SCL-series digital cameras. Same voltage, same connector, same form factor as the original.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSCL-series platform fit:\u003c\/strong\u003e\n    Samsung's SCL line shares a common battery bay, connector pinout, and BMS handshake protocol across the SCL810 through SCL901 range. All three OEM part numbers — SB-L160, SB-L110A, SB-L320 — are electrically identical at 7.4V and physically interchangeable within this camera family.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the SCL-series BMS under photo and video load. The protection circuit responded correctly to charge termination and low-voltage cutoff, and the camera body accepted the cell without error flags on first install after one full charge cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge protocol for SCL cameras:\u003c\/strong\u003e\n    Run the initial charge inside the camera body using the OEM cable or charger — not a generic USB bank. The SCL BMS maps its battery-remaining display against a voltage curve it captures during that first supervised charge cycle. Skipping this step often causes the indicator to read inaccurately for the life of the cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the SCL810 shows a dead-battery icon on a freshly charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe SCL810's BMS calibrates its indicator against the discharge curve it recorded from the original cell. A new cell with a different internal resistance profile can read as depleted even when voltage is near full. This is a calibration mismatch, not a fault in the replacement. Charge the new cell fully inside the camera body — the BMS re-maps its threshold against the new curve during that first cycle. After one full charge-discharge cycle in-camera, the indicator typically stabilises and reads accurately.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically mid-shoot on the SCL series\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eErratic percentage readings — dropping from 60% to 20% in a few frames, then recovering — point to a voltage-threshold mismatch between the cell's actual discharge curve and the camera's stored lookup table. It happens most often when a replacement cell has a slightly different mid-discharge voltage plateau than the OEM cell the BMS was calibrated against. Run two full charge and discharge cycles in-camera to allow the BMS to update its mapping. If the jumping persists after two cycles, check that resting voltage after a full charge reads at or above 8.2V with a multimeter.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333865504858,"sku":"BWCS-SBL320-1","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333865537626,"sku":"BWCS-SBL320-2","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333865570394,"sku":"BWCS-SBL320-3","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SBL320-1.webp?v=1778213403","url":"https:\/\/batteryweb.com\/products\/samsung-scl810-replacement-battery-74v-3700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}