{"product_id":"samsung-vp-d351i-replacement-battery-74v-800mah-li-ion","title":"Samsung SB-LSM80 Replacement Battery 7.4V 800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung VP-D351i \/ VP-DC161Wi \/ SC-D353 Series — 7.4V Li-ion Replacement Battery (SB-LSM80)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 800mAh Li-ion replacement for the Samsung SB-LSM80 battery. It fits the Samsung VP-D351i and related MiniDV camcorder models including the VP-DC161Wi, VP-D965W, and SC-D353. Drop it into any of these bodies and it seats into the same battery bay without modification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVP-D351i, VP-DC161Wi, VP-D965W, SC-D353 platform fit:\u003c\/strong\u003e\n    These models share the same 7.4V lithium-ion battery format, connector pinout, and BMS communication protocol. One cell design covers all of them without any adapter or wiring change.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on MiniDV-class camcorder hardware. The BMS handshake completed cleanly, and the protection circuit triggered correctly at both the high and low voltage cutoff thresholds.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on VP-D351i bodies:\u003c\/strong\u003e\n    Charge this cell fully via the OEM charger or inside the camcorder body before your first recording session. Samsung's BMS in these bodies reads the cell's charge curve during that first cycle to calibrate the battery-remaining indicator — skipping it causes the display to read erratically from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eVP-D351i battery indicator dropping to zero before the cell is actually empty\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe VP-D351i uses a voltage-threshold map to estimate remaining charge. The OEM cell's discharge curve was baked into that map at the factory. A replacement cell with a slightly different discharge profile hits those voltage thresholds at different points in its actual charge state. The result is the indicator jumps or collapses early even though the cell still has usable capacity. Running one full charge-discharge cycle inside the camera body lets the BMS recalibrate against the new cell's actual curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamcorder displays \"no battery\" immediately after fitting a charged replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the BMS in the camera body hasn't yet authenticated the new cell — it reads open-circuit voltage on first contact and can reject anything outside a narrow expected range. The fix is simple: seat the battery, connect the OEM charger, and let it run one full charge cycle without interrupting it. Once the charger completes, the camera body accepts the cell and the \"no battery\" warning clears. If it persists, check that the battery contacts are fully seated — the SB-LSM80 connector requires firm pressure to around 3.6V per cell before the BMS closes the circuit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333865996378,"sku":"BWCS-LSM80-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333866029146,"sku":"BWCS-LSM80-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333866061914,"sku":"BWCS-LSM80-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LSM80_1.webp?v=1778213291","url":"https:\/\/batteryweb.com\/products\/samsung-vp-d351i-replacement-battery-74v-800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}