{"product_id":"samuel-stl-500-replacement-battery-20v-4900mah-li-ion","title":"Samuel STL-500 20V Replacement Battery U80586R01 4900mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamuel STL-500 — 20V Li-ion Replacement Battery (U80586R01)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 20V Li-ion replacement battery pack rated at 4900mAh (98Wh) for the Samuel STL-500 series. It fits cordless drills, impact drivers, and other STL-500 platform tools that draw from the 20V rail. The OEM part number U80586R01 maps directly to this pack's connector pinout and BMS communication protocol.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTL-500 platform fit:\u003c\/strong\u003e\n    STL-500 series tools share a common 20V battery interface — same terminal layout, same BMS handshake signal, same mechanical latch geometry. Any tool on this platform pulls from the same voltage rail, so one pack covers the full lineup without adapter hardware.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through repeated motor-start inrush cycles on a cordless drill at rated torque. The BMS held the overcurrent threshold correctly across all test pulls — no false trips, and the cell temperature stayed within spec under sustained load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle load conditioning:\u003c\/strong\u003e\n    On first use, run your STL-500 tool at half load for two cycles before full-torque applications. This lets the BMS sample the motor's inrush current draw and set its overcurrent protection threshold accurately — reducing the chance of nuisance cutoffs on heavy pulls later.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on STL-500 motor-start inrush surge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger on a drill or impact driver, the motor draws a current spike that can be three to five times the running current — this happens in the first milliseconds before the rotor builds speed. A fresh pack with a BMS that hasn't yet profiled that specific motor will sometimes trip its overcurrent protection at that moment, cutting the tool dead. The fix is not a hardware fault — it's a calibration gap. Running two half-load cycles first gives the BMS enough data to widen its trip window just enough for the inrush spike without compromising protection at genuinely dangerous overcurrent levels.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger blinking red on a new STL-500 pack after storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage, and most chargers will refuse to begin a charge cycle if the pack voltage has dropped below roughly 12–14V on a 20V nominal pack — this protects against charging a deeply discharged cell at full current. The charger blinks red because it sees the voltage and flags it as a fault rather than a depleted battery. To recover the pack, place it on the charger and wait up to 15 minutes — many chargers run a low-current trickle pre-charge at this stage to bring the cell voltage back above the acceptance threshold. If the charger accepts the pack, it will switch from red to charging mode automatically; if not after 20 minutes, check that the pack terminals read at least 10V with a multimeter before retrying.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416006492250,"sku":"BWCS-STL500PW-1","price":90.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416006525018,"sku":"BWCS-STL500PW-2","price":106.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416006557786,"sku":"BWCS-STL500PW-3","price":118.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-STL500PW-1.webp?v=1779759303","url":"https:\/\/batteryweb.com\/products\/samuel-stl-500-replacement-battery-20v-4900mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}