{"product_id":"sanyo-replacement-battery-24v-600mah-ni-mh","title":"Sanyo PCH0 Cordless Phone Replacement Battery 2.4V 600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSanyo PCH0 — 2.4V Ni-MH Replacement Battery for Cordless Phone\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 600mAh Ni-MH replacement battery for Sanyo cordless phone handsets using the PCH0 pack. It slots into the handset battery compartment and restores cordless talk capability when the original cell has degraded past usable capacity. Voltage and chemistry match the original spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePCH0 pack compatibility:\u003c\/strong\u003e\n    Cordless handsets on the PCH0 platform share a 2.4V dual-cell NiMH configuration. The base station charger circuit targets a fixed termination voltage — swapping chemistry or voltage would cause charge errors or unsafe trickle behaviour, so matching both is non-negotiable.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on a cordless handset base. The BMS accepted charge normally, trickle charge kicked in at full termination, and the handset reported full status on the display within expected cycle time.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge after install:\u003c\/strong\u003e\n    Place the handset in the base cradle for a full 16 hours before first use. NiMH cordless phone cells arrive in a partially discharged state from storage — a slow initial charge lets each cell reach rated capacity rather than leaving one cell undercharged and reducing overall pack performance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light with new NiMH pack\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA NiMH pack sitting in storage for weeks can drop to 1.8V or lower per cell. Some cordless base chargers use a voltage-sense threshold before initiating the main charge cycle — if the pack arrives below that threshold, the base treats it as a fault and either flashes an error LED or does nothing. The fix is to seat the handset firmly in the base and leave it undisturbed for at least 30 minutes. Most base stations will detect a slow voltage rise and step out of fault mode into normal charge. If the error persists after 30 minutes, reseat the handset to re-trigger the detection circuit.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time noticeably shorter than rated for the first few cycles\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells need three to five full charge and discharge cycles before they reach rated capacity — this is normal for the chemistry, not a defect with this pack. During those early cycles the electrolyte hasn't fully wetted all active material, so the usable capacity reads low. Run the handset down to the low-battery warning, then return it to the base for a full charge. Repeat that process three to five times and talk time will stabilise at the rated 600mAh output.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340096569434,"sku":"BWCS-P305CL-1","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340096602202,"sku":"BWCS-P305CL-2","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340096634970,"sku":"BWCS-P305CL-3","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P305CL-1.webp?v=1778367187","url":"https:\/\/batteryweb.com\/products\/sanyo-replacement-battery-24v-600mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}