{"product_id":"sanyo-replacement-battery-36v-850mah-ni-mh","title":"Sanyo GES-PC619 Cordless Phone Compatible Battery 3.6V 850mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSanyo GES-PC619 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 850mAh Ni-MH replacement battery for Sanyo cordless phone handsets using the GES-PC619 pack. It restores power to handsets that no longer hold adequate charge. Fits cordless phone models originally shipped with the GES-PC619 battery.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGES-PC619 cordless handset fit:\u003c\/strong\u003e\n    Sanyo cordless handsets in this family share a common 3.6V single-cell Ni-MH pack, a standardised connector pinout, and a passive charge circuit in the base station — no BMS handshake required, so the replacement integrates directly with the existing charging cradle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a Ni-MH-compatible analyser. Capacity came up across the first three cycles and held stable at rated 850mAh by cycle four. The cell accepted charge from a standard Sanyo base without triggering any charge-rejection events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells in cordless phones arrive partially discharged from storage. A slow first charge through the base station allows the cell to reach rated capacity — skipping this step means the first few calls will see shorter talk time than expected.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after fitting a new pack\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eSanyo base stations use a delta-peak detection circuit to confirm a Ni-MH cell is accepting charge. A new cell that has self-discharged during storage can present a resting voltage low enough that the base misreads it as a fault condition. The fix is to leave the handset seated in the base undisturbed — the trickle stage will begin regardless, and the base will switch to full charge once the cell voltage climbs above roughly 3.0V. If the error light persists beyond two hours, remove and reseat the handset to reinitialise the charge cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange drops noticeably mid-call after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDECT transmit power draws a sharp current spike each time the handset bursts data to the base. A Ni-MH cell that has not yet been fully conditioned has higher internal resistance, which causes voltage to sag under that RF load. The handset firmware responds to the sag by reducing transmit power, and range shrinks as a result. Run three full charge-discharge cycles through the base station — internal resistance drops after conditioning and the voltage sag under load will fall back into spec, restoring normal range.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340109840474,"sku":"BWCS-P104CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340109873242,"sku":"BWCS-P104CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340109906010,"sku":"BWCS-P104CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P104CL-1.webp?v=1778367188","url":"https:\/\/batteryweb.com\/products\/sanyo-replacement-battery-36v-850mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}