{"product_id":"satlook-micro-replacement-battery-12v-2000mah-ni-mh","title":"SatLook Micro+ 12V Replacement Battery NB-2x5 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSatLook Micro+ \/ Micro G2 \/ Micro HD — 12V Ni-MH Replacement Battery (NB-2x5)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 2000mAh Ni-MH replacement for the SatLook NB-2x5 battery pack. It fits the Micro+, Micro G2, and Micro HD portable satellite field instruments. Voltage and cell count match the original pack exactly, so the instrument's power rail sees no difference on startup.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMicro+, Micro G2, and Micro HD compatibility:\u003c\/strong\u003e\n    All three models share the same 12V bus, NB-2x5 footprint, and connector pinout. The BMS handshake across all three expects the same charge profile — this pack meets that profile without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through a full charge cycle and simulated a field measurement session with sustained sensor load. The BMS held voltage within spec throughout logging and did not trip on probe initialisation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst deployment after install:\u003c\/strong\u003e\n    After fitting this pack, run a full calibration cycle through the instrument menu before heading into the field. The Micro+ maps battery state during calibration — skipping it causes the low-battery indicator to fire early on the first real measurement session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff when the SatLook probe or sensor module initialises\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the instrument powers up a connected probe or sensor module, it draws a short current spike that can exceed the BMS overcurrent threshold on a partially discharged or cold pack. The BMS interprets this spike as a fault and cuts power, which shuts the instrument down mid-startup. This is more common in cold field conditions, where Ni-MH internal resistance rises sharply. Charge the pack fully to 12V before connecting any external probe module — a full cell means lower internal resistance and a narrower spike.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eInstrument readings drift or reset during an active logging session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSustained sensor load during a long logging session draws continuous current that gradually pulls cell voltage down. If voltage sags below the instrument's operating threshold — typically around 10.5V for a 12V Ni-MH pack — the processor resets to prevent corrupt data writes, which clears the active log buffer. This shows up as readings jumping back to zero or session data disappearing mid-field. If this happens repeatedly, check terminal voltage under load with a multimeter; anything below 10.8V under active sensor draw means the pack needs replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360708362330,"sku":"BWCS-SKM200SL-1","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360708395098,"sku":"BWCS-SKM200SL-2","price":64.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360708427866,"sku":"BWCS-SKM200SL-3","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SKM200SL-1.webp?v=1778616209","url":"https:\/\/batteryweb.com\/products\/satlook-micro-replacement-battery-12v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}