{"product_id":"sbc-sbc-202-replacement-battery-36v-700mah-ni-mh","title":"SBC-202 Cordless Phone Compatible Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSBC SBC-202 \/ SBC-3775 — 3.6V Ni-MH Replacement Battery (SBC-202)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 700mAh Ni-MH rechargeable battery for the SBC SBC-202 and SBC-3775 cordless phone handsets. It replaces the original pack when the handset can no longer hold a charge through a normal call. Voltage, connector, and physical dimensions match the OEM spec — 45.20 x 31.16 x 10.50mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSBC-202 and SBC-3775 compatibility:\u003c\/strong\u003e\n    Both handsets run the same 3.6V single-cell NiMH platform and share an identical battery bay and connector pinout, so one pack covers both models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the SBC-202 handset. The base station accepted the pack without error, and the BMS held within the 3.6V nominal rail through each cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells shipped in partial-charge storage state need a slow, uninterrupted first charge to reach rated 700mAh capacity.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNew NiMH cells arrive from storage at partial charge and need three to five full charge-discharge cycles before reaching rated capacity. On cycle one, talk time will be noticeably shorter than the original pack at its peak. Each subsequent full charge closes the gap. By cycle five, the pack should be at or near the 700mAh rated capacity — if it is not, confirm the handset is fully seated and the base contacts are clean.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no-charge or error light with new pack installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH packs stored at low voltage can fall below the minimum threshold the base station uses to detect a valid battery. The charger circuit reads the pack as absent or faulty and throws an error light instead of starting a charge cycle. Remove the handset, clean both the handset and base contacts with a dry cloth, then reseat firmly. If the error clears but reappears, the pack voltage is too low for the base to accept — connect a compatible NiMH charger externally at 3.6V to prime the pack before returning it to the base.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339948425306,"sku":"BWCS-BT930CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339948458074,"sku":"BWCS-BT930CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339948490842,"sku":"BWCS-BT930CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BT930CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/sbc-sbc-202-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}