{"product_id":"scilogex-levo-plus-replacement-battery-37v-1000mah-li-ion","title":"Scilogex Levo PLUS 3.7V Compatible Battery 293032","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eScilogex Levo PLUS — 3.7V Li-ion Replacement Battery (293032)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 1000mAh Li-ion cell restores cordless operation to the Scilogex Levo PLUS and Levo Plus Motorized Pipette Filler. It replaces OEM part numbers 293032, 293032-A, 293032-B, and 293032-C. The Levo PLUS is a portable laboratory mixer used for vortex and orbital sample preparation in medical and clinical settings.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLevo PLUS and Motorized Pipette Filler compatibility:\u003c\/strong\u003e\n    Both devices share the same 3.7V cell format, connector pinout, and BMS handshake. The OEM suffix variants (A, B, C) reflect production revisions only — the cell specification is unchanged across all variants.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the Levo PLUS platform. The BMS completed its current monitoring and cutoff checks without triggering any fault flags across multiple cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting this battery, allow the Levo PLUS to complete its full power-on self-test without interruption. The device runs a BMS verification sequence at startup — cutting power mid-sequence can latch a false battery fault that persists until a clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLevo PLUS shutting off unexpectedly during sample mixing cycles\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNew Li-ion cells carry higher internal resistance in the first 5–10 cycles. The Levo PLUS load profile during active mixing draws short, repetitive bursts that stress a new cell harder than steady-state use. The BMS reads this as a voltage sag event and triggers a protective shutdown before the cell is actually depleted. Running two or three full charge-discharge cycles before clinical use brings internal resistance down and stops nuisance cutoffs.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator not reaching 100% on first charge after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Levo PLUS charge IC applies a conservative current limit when it detects a cell it hasn't profiled before. On the first charge, the controller may terminate early — typically between 85–95% — rather than pushing to full capacity. This is a one-time calibration behaviour, not a cell fault. Complete a full discharge down to the low-battery cutoff, then recharge uninterrupted to let the charge IC lock in the correct termination voltage for this cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381362425946,"sku":"BWCS-SGX293MD-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381362458714,"sku":"BWCS-SGX293MD-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381362491482,"sku":"BWCS-SGX293MD-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SGX293MD-1.webp?v=1778900304","url":"https:\/\/batteryweb.com\/products\/scilogex-levo-plus-replacement-battery-37v-1000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}