{"product_id":"sencor-srv-9385wh-replacement-battery-144v-6700mah-li-ion","title":"Sencor SRX 9301 Replacement Battery 14.4V 6700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSencor SRV 9385WH \/ SRV 9350WH — 14.4V Li-ion Replacement Battery (SRX 9301)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V Li-ion replacement battery rated at 6700mAh (96.48Wh), built to the SRX 9301 specification. It fits the Sencor SRV 9385WH and SRV 9350WH cordless stick vacuums. When the original cell degrades after repeated charge cycles, suction power drops noticeably — this cell restores full motor voltage to the cleaning head.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSRV 9385WH and SRV 9350WH compatibility:\u003c\/strong\u003e\n    Both models run the same 14.4V rail, share the SRX 9301 connector pinout, and use the same BMS handshake with the Sencor charger. One cell covers both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through load tests replicating carpet and hard-floor motor draw. The BMS held voltage under sustained suction load and tripped correctly on overcurrent — no false cutoffs at normal operating current.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on the SRV series:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Continuous dock charge on these vacuums causes capacity fade faster than ordinary use does. Charge to full, then remove the unit from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage sag issue, not a capacity issue. When the filter is partially blocked, the motor pulls more current than rated to maintain airflow. Under that elevated draw, cell voltage drops faster than the indicator tracks — the motor slows before the indicator registers low. Clean or replace the filter first. If sag continues on a clean filter, the original cell has lost enough internal capacity that resting voltage no longer reflects true charge state.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a charger or connection fault. Sustained restricted airflow — blocked filter, clogged brush roll, or pinched hose — forces the motor to draw current beyond the BMS threshold. The BMS trips to protect the cell, cuts power, and resets once current demand drops. Clearing the restriction stops the trip cycle. If the motor cuts out even on an unblocked, clean machine, confirm open-circuit voltage on the replacement cell reads at least 14.4V before fitting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426465415258,"sku":"BWCS-SRV935VX-1","price":510.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426465448026,"sku":"BWCS-SRV935VX-2","price":610.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426465480794,"sku":"BWCS-SRV935VX-3","price":685.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SRV935VX-1.webp?v=1779933316","url":"https:\/\/batteryweb.com\/products\/sencor-srv-9385wh-replacement-battery-144v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}