{"product_id":"sennheiser-sdw-30-replacement-battery-37v-450mah-li-polymer","title":"Sennheiser SDW 30 Replacement Battery AHB732038T 3.7V 450mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSennheiser SDW 30 \/ SDW 60 Series — 3.7V Li-Polymer Replacement Battery (AHB732038T)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 450mAh Li-Polymer cell replaces the original AHB732038T battery in Sennheiser DECT wireless headsets. It fits the SDW 30, SDW 60, DW 30 HS, SDW 60 HS, and over 56 additional models in the SDW and DW headset range. The cell matches the original dimensions at 36.10 × 19.60 × 6.90mm, so it seats correctly in the headset housing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSDW and DW series compatibility:\u003c\/strong\u003e\n    These headsets share the same cell format, connector pinout, and BMS handshake protocol across the SDW and DW lines. One battery spec covers the full range because Sennheiser standardised the power cell across that platform.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the base station. The BMS completed its handshake with the charging dock and the charge indicator progressed normally through each stage without fault flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on a new cell:\u003c\/strong\u003e\n    Seat the headset in the base station and let it complete one full uninterrupted charge before taking a call. DECT headsets use the base station to log the new cell capacity — until that first cycle completes, the talk-time estimate displayed on paired software or the base may read inaccurate.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station not recognising the new pack after fitting\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA replacement Li-Polymer cell ships at storage voltage — typically around 3.6V — not at the 3.7V nominal the BMS expects to see at the start of a charge handshake. Some SDW base stations respond to this by refusing to initiate the charge sequence or displaying a charge error. Reseating the headset once will usually clear this. If the base still shows an error, leave the headset seated for 10 minutes — the base trickle-charges the cell up past the BMS threshold before switching to normal charge mode.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eHeadset cuts out mid-call even with a new battery fitted\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe SDW 30 drives both its audio circuit and the DECT radio transmitter from the same 3.7V cell simultaneously. During a call, that combined draw can cause brief voltage sag in a cell that has not yet been conditioned. The BMS reads the sag as an undervoltage event and trips the protection circuit, cutting the headset off. This behaviour typically resolves after three to five full charge and discharge cycles as the cell reaches its rated capacity — do not mistake it for a faulty unit after the first use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428118954074,"sku":"BWCS-SDW300SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428118986842,"sku":"BWCS-SDW300SL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428119019610,"sku":"BWCS-SDW300SL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SDW300SL-1.webp?v=1779934190","url":"https:\/\/batteryweb.com\/products\/sennheiser-sdw-30-replacement-battery-37v-450mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}