{"product_id":"sharp-cl-410-replacement-battery-36v-1300mah-ni-mh","title":"Sharp CL-410 Cordless Phone Replacement Battery 3.6V 1300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSharp CL-410 \/ CL-100W \/ CL-200 — 3.6V Ni-MH 1300mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 1300mAh Ni-MH replacement battery for Sharp cordless phone handsets. It fits the CL-410, 3600, CL-100W, CL-200, and three additional Sharp cordless models. Dimensions are 50.57 × 42.47 × 14.35mm — confirm against your existing pack before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCL series handset compatibility:\u003c\/strong\u003e\n    These Sharp cordless models share a common 3.6V single-cell Ni-MH battery bay with the same connector orientation and contact spacing. Voltage rail and physical format are consistent across the cluster, so one pack covers the full model range listed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a Sharp CL-series handset. The battery accepted charge from the base station without triggering an error state, and cell voltage held within the expected Ni-MH discharge curve under simulated standby and talk load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH cordless packs:\u003c\/strong\u003e\n    Place the handset in the base immediately after installing this battery and leave it for a full 16 hours before first use. Ni-MH cells shipped from storage are partially discharged — skipping this slow initial charge means the pack will not reach rated 1300mAh capacity, and talk time will appear short from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange dropping on the CL-410 after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe CL-410 DECT transmitter draws a short current spike each time it sends a radio burst to the base station. A Ni-MH pack that hasn't completed conditioning cycles can't sustain voltage under that RF load, so terminal voltage sags below the handset's transmit threshold. The handset responds by cutting transmit power, which shortens usable range. Running three to five full charge-discharge cycles brings cell internal resistance down and stabilises voltage under RF load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge light after fitting a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSharp CL-series bases check incoming battery voltage before engaging the charge circuit. A pack that has sat in storage can drop below the base's acceptance threshold — typically around 3.0V for a 3.6V Ni-MH cell. The base interprets this as a fault rather than a discharged battery and shows no charge indicator. To recover, seat the handset firmly in the base and wait up to 30 minutes — most Sharp bases run a trickle pre-charge stage that brings the pack above 3.0V before switching to full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340073599066,"sku":"BWCS-P501HL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340073631834,"sku":"BWCS-P501HL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340073664602,"sku":"BWCS-P501HL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P501HL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/sharp-cl-410-replacement-battery-36v-1300mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}