{"product_id":"shinelon-t3ti-replacement-battery-144v-2200mah-li-ion","title":"Shinelon T3TI Laptop Replacement Battery 14.4V 2200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eShinelon T3TI \/ T3 Pro — 14.4V Li-ion Replacement Battery (6-87-NH50S-41C00)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 2200mAh (31.68Wh) Li-ion replacement battery for the Shinelon T3TI and T3 Pro laptops. It slots into the same bay as the original Clevo-platform cell and uses OEM part numbers 6-87-NH50S-41C00 and NH50BAT-4. Install it when the existing pack no longer holds charge or the OS reports degraded health.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eT3TI and T3 Pro compatibility:\u003c\/strong\u003e\n    Both models run on the same Clevo NH50 platform, sharing an identical battery bay, connector pinout, and BMS handshake protocol. One cell fits both without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge, full discharge to BMS cutoff, and recharge on a T3TI unit. The BMS accepted the new pack without error flags, and the charge controller reached full 14.4V without throttling.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle calibration on the T3TI:\u003c\/strong\u003e\n    After installing, run one full discharge until the laptop hibernates at its low-voltage cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting battery health as poor immediately after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Clevo NH50 BIOS reads health data stored in the battery pack's EEPROM. A new cell ships with factory EEPROM values that don't match the laptop's learned charge history, so the BIOS flags it as degraded or unknown. This is not a fault with the replacement cell. Run one full discharge-to-hibernate cycle followed by a complete uninterrupted charge. After two to three cycles, the BIOS recalibrates and the health warning clears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop shuts down at 20–30% charge shown on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC hasn't yet calibrated against the new cell's actual voltage curve. The OS reads an estimated state of charge, but the real cell voltage drops below the system's cutoff threshold before the display reaches 0%. The fix is a calibration cycle — let the laptop discharge fully until it hibernates, then charge to 100% without interruption. Repeat this two to three times until the shutdown point drops below 5% shown on screen.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409593040986,"sku":"BWCS-CLH580NB-1","price":65.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409593073754,"sku":"BWCS-CLH580NB-2","price":77.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409593106522,"sku":"BWCS-CLH580NB-3","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CLH580NB-1.webp?v=1779580129","url":"https:\/\/batteryweb.com\/products\/shinelon-t3ti-replacement-battery-144v-2200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}