{"product_id":"shinelon-t3ti-replacement-battery-146v-2750mah-li-ion","title":"Shinelon T3TI Laptop Replacement Battery 14.6V 2750mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eShinelon T3TI \/ T3 Pro — 14.6V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.6V, 2750mAh (40.15Wh) lithium-ion battery for the Shinelon T3TI and T3 Pro laptops. It replaces the original cell when the notebook no longer holds a usable charge or fails to power on without the AC adapter. Capacity figures are taken directly from the product specification — not extrapolated from third-party sources.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eT3TI and T3 Pro platform fit:\u003c\/strong\u003e\n    Both models run the same 14.6V battery rail with an identical connector pinout and BMS handshake protocol. One cell covers both variants — no wiring adapters or firmware workarounds needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and full-load discharge on a T3 Pro. The BMS held cutoff voltage at the correct low-cell threshold and accepted a full charge without tripping over-voltage protection.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle calibration on the T3TI:\u003c\/strong\u003e\n    After installing, run the laptop down to hibernate cutoff under normal use, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell and clears the inaccurate health warning that appears after every cell swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting poor battery health immediately after installing the new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe BIOS reads health data stored in the battery's EEPROM, not from live cell measurements. When a new cell ships, its EEPROM cycle count and state-of-health fields are blank or set to factory defaults that the BIOS misreads as degraded. Running one full discharge-to-hibernate followed by an uninterrupted full charge allows the firmware to write a fresh baseline to the fuel gauge IC. After that cycle, health status typically returns to normal without any BIOS update or driver change.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop shuts down abruptly at 20–30% charge shown on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff, not a capacity fault. Under combined CPU and display load, cell voltage drops faster than the fuel gauge IC can track — the BIOS sees terminal voltage fall below its cutoff threshold before the percentage reaches zero. The OS percentage reading lags the real cell state because the fuel gauge IC hasn't completed enough cycles against the new cell to map the discharge curve accurately. Run two to three full discharge and charge cycles, and the shutdown point will shift down toward the correct low-percentage range. If the shutdowns persist past five cycles, check that AC adapter output is stable at its rated voltage under load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409577902170,"sku":"BWCS-CLH700NB-1","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409577934938,"sku":"BWCS-CLH700NB-2","price":60.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409577967706,"sku":"BWCS-CLH700NB-3","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CLH700NB-1.webp?v=1779580060","url":"https:\/\/batteryweb.com\/products\/shinelon-t3ti-replacement-battery-146v-2750mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}