{"product_id":"siemens-acuson-p300-replacement-battery-144v-7800mah-li-ion","title":"Siemens ACUSON P300 Replacement Battery 14.4V 7800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSiemens ACUSON P300 — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V 7800mAh Li-ion battery is a direct replacement for the Siemens ACUSON P300 portable ultrasound system. It fits the P300 compact point-of-care platform used in clinical and bedside imaging. Voltage and capacity match the original pack at 14.4V and 112.32Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eACUSON P300 platform fit:\u003c\/strong\u003e\n    The P300 runs a single-voltage 14.4V rail across its imaging and processing subsystems. The connector keying, cell count, and BMS communication protocol must match exactly — a mismatched pack trips a hardware fault before the boot sequence completes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through the P300 power-on self-test sequence and monitored BMS handshake signals. The charge IC accepted the cell chemistry without throwing a fault code, and the BMS reported state-of-health correctly after the first full charge cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting this battery, allow the P300 to complete its full power-on self-test without interruption. The device runs a BMS verification pass at startup — cutting power mid-sequence stores a false battery fault in the system log that persists until the next clean reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the ACUSON P300 flags a battery fault immediately after swapping in a new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe P300 BMS compares the new cell's reported state-of-charge against a threshold calibrated for a conditioned OEM pack. A fresh cell that hasn't completed its first full charge-discharge cycle will sit just below that threshold. The device interprets this as a degraded or incompatible battery and raises a fault flag before imaging is available. Running one complete charge cycle — from flat to 100% without interruption — resets the BMS learned capacity register and clears the flag on the next boot.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator stuck below 100% on first charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge, the P300's charge IC applies a conservative current limit to an unrecognised cell until the BMS logs a full voltage profile. This causes the charge indicator to plateau between 90–95% and stall. This is not a fault — it is the charge IC in qualification mode. Let the charge cycle run to natural termination without removing the battery; the second charge cycle will reach 100% and the indicator will behave normally from that point.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381463941210,"sku":"BWCS-PHD202MD-1","price":311.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381463973978,"sku":"BWCS-PHD202MD-2","price":371.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381464006746,"sku":"BWCS-PHD202MD-3","price":416.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PHD202MD-1.webp?v=1778901015","url":"https:\/\/batteryweb.com\/products\/siemens-acuson-p300-replacement-battery-144v-7800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}