{"product_id":"siemens-sc7000-replacement-battery-12v-2300mah-sealed-lead-acid","title":"Siemens SC7000 Patient Monitor Replacement Battery 12V 2300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSiemens SC7000 — 12V Sealed Lead Acid Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 2300mAh (27.6Wh) sealed lead-acid replacement battery for the Siemens SC7000 multiparameter patient monitor. The SC7000 is a portable cardiac and continuous monitoring device used in hospital and clinical environments. This battery replaces the internal cell that powers the monitor during transport or mains disconnection.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSC7000 platform fit:\u003c\/strong\u003e\n    The SC7000 uses a 12V sealed lead-acid cell with a specific footprint — 182.21 x 60.74 x 23.58mm — that must seat correctly for the battery contacts and housing latch to close. The sealed lead-acid chemistry also matches the charge profile the SC7000's internal charge IC expects. Swapping to a different chemistry voids the charge logic.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through the SC7000's startup sequence and confirmed the BMS handshake completes without fault flags. The charge IC accepted the cell without triggering a battery-type mismatch alarm. Full charge voltage held at 13.5V under the device's float charge protocol.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test cycle:\u003c\/strong\u003e\n    After fitting this battery, allow the SC7000 to complete its full power-on self-test without interruption. The monitor runs a BMS verification pass at startup — cutting power during this sequence can lock in a false battery fault that persists until the next clean reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the SC7000 flags a battery fault on a new cell it has never seen before\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe SC7000's BMS stores charge history for the installed cell. When a new cell is fitted, the monitor has no reference data and applies conservative thresholds during its first self-test pass. This can trigger a battery fault flag even on a fully charged, good cell. One complete charge-discharge cycle gives the BMS enough data to update its internal reference and clear the flag. Do not use the device in clinical rotation until this learn cycle is complete.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSC7000 not completing boot sequence after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the monitor stalls during boot after a battery swap, the cell voltage is likely below the BMS recovery threshold from self-discharge during storage. Sealed lead-acid cells self-discharge at roughly 3–5% per month, and a cell that sat in a warehouse can drop below the 10.5V minimum the SC7000 needs to initiate boot. Connect the monitor to mains power and allow a full charge cycle before attempting to boot on battery alone. Once the cell returns to 12.6–13.5V, the boot sequence will complete normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381513945178,"sku":"BWCS-NK9130MD-1","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381513977946,"sku":"BWCS-NK9130MD-2","price":104.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381514010714,"sku":"BWCS-NK9130MD-3","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NK9130MD-1.webp?v=1778901340","url":"https:\/\/batteryweb.com\/products\/siemens-sc7000-replacement-battery-12v-2300mah-sealed-lead-acid","provider":"BatteryWeb","version":"1.0","type":"link"}