{"product_id":"silvercrest-action-cam-scaa-500-a1-replacement-battery-37v-1050mah-li-ion","title":"Silvercrest Action Cam AT-S60 Replacement Battery 3.7V 1050mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSilvercrest Action Cam SCAA 5.00 A1 — 3.7V Li-ion Replacement Battery (AT-S60)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1050mAh Li-ion cell replaces the original AT-S60 battery in the Silvercrest Action Cam SCAA 5.00 A1. It fits the compact action camera body and connects via the standard contact plate. Dimensions are 43.30 × 31.30 × 7.10mm — identical to the factory cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSCAA 5.00 A1 fit confirmed:\u003c\/strong\u003e\n    The SCAA 5.00 A1 uses a single-cell 3.7V flat pack with a specific contact pitch. This cell matches that voltage rail and physical footprint, so the door closes flush and the contacts seat correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the SCAA 5.00 A1 body, monitoring the BMS handshake on first charge insertion. The protection circuit tripped correctly at low-voltage cutoff and accepted a full charge without fault flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge via camera body:\u003c\/strong\u003e\n    Charge this cell inside the SCAA 5.00 A1 body — not via an external charger — before your first shoot. Some action cam BMS firmware maps the battery-remaining display only after it reads the initial charge curve from within the body itself.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDead battery indicator on the SCAA 5.00 A1 with a partially charged replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe SCAA 5.00 A1 uses a voltage-threshold method to estimate charge level. A new replacement cell ships at storage charge — typically around 3.6–3.7V — which can sit right at or below the camera's low-battery threshold. The camera reads this as a flat or dead cell even though the battery is not depleted. One full charge cycle inside the camera body recalibrates the threshold map and clears the false indicator.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically during recording\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eAction cameras log discharge curves based on the original factory cell's voltage profile. A replacement cell with a slightly different discharge slope can cause the indicator to jump — for example, dropping from 60% to 20% in a short span. This is a display mapping issue, not a cell fault. Run two full charge-discharge cycles through the camera body and the firmware will re-anchor its percentage steps to the new cell's actual curve. After that, readings stabilise to within a few percentage points of real charge state.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333706350682,"sku":"BWCS-ZM400MC-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333706383450,"sku":"BWCS-ZM400MC-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333706416218,"sku":"BWCS-ZM400MC-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZM400MC-1.webp?v=1778213032","url":"https:\/\/batteryweb.com\/products\/silvercrest-action-cam-scaa-500-a1-replacement-battery-37v-1050mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}