{"product_id":"silvercrest-hd-camcorder-scaz-500-a1-replacement-battery-37v-1800mah-li-ion","title":"Silvercrest SCAZ 5.00 A1 Replacement Battery 3.7V 1800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSilvercrest HD Camcorder SCAZ 5.00 A1 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1800mAh Li-ion cell replaces the original battery in the Silvercrest HD camcorder SCAZ 5.00 A1, SCAZ 5.00 B2, and related models (67099, 75981). It matches the OEM voltage rail and physical footprint. Capacity is sourced from the product specification — 6.66Wh total energy.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSCAZ 5.00 A1 and B2 compatibility:\u003c\/strong\u003e\n    Both camcorder variants share the same 3.7V battery bay, connector pinout, and BMS handshake protocol. A single cell covers both because the power management circuit does not distinguish between model revisions — only voltage and cell chemistry matter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the SCAZ 5.00 series battery circuit. The BMS accepted the replacement without error flags, held steady at 3.7V nominal under recording load, and cut off cleanly at the low-voltage threshold without forcing a hard shutdown mid-recording.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge protocol for SCAZ 5.00 series:\u003c\/strong\u003e\n    Charge this cell fully inside the camera body or OEM charger before your first recording session. The SCAZ BMS maps battery-remaining percentage against a known discharge curve — it needs one full charge cycle from within the camera to calibrate that readout accurately on a new cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the SCAZ 5.00 display\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe SCAZ 5.00 series maps its battery indicator against a fixed voltage-threshold curve stored in the camera firmware. A new Li-ion cell has a slightly different discharge profile than a worn original — the voltage steps don't always land where the camera expects them. This makes the indicator jump forward or backward by 10–20% as the cell discharges through different load states. Running one complete charge and discharge cycle inside the camera body lets the BMS re-anchor the percentage readout to the new cell's actual curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSCAZ 5.00 showing dead battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the replacement cell arrives at a storage charge of around 3.6–3.65V and the camera interprets that voltage as critically low based on its indicator mapping. The cell is not flat — the camera is reading a voltage point it associates with end-of-life on a degraded original battery. Place the cell in the OEM charger first and charge to full (4.2V), then insert it into the camera. The indicator will reset to a correct starting point and the false low-battery flag will clear.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333869371482,"sku":"BWCS-NP120FU-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333869404250,"sku":"BWCS-NP120FU-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333869437018,"sku":"BWCS-NP120FU-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP120FU-1.webp?v=1778213403","url":"https:\/\/batteryweb.com\/products\/silvercrest-hd-camcorder-scaz-500-a1-replacement-battery-37v-1800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}