{"product_id":"simolio-wireless-tv-speaker-replacement-battery-74v-1100mah-li-polymer","title":"Simolio SM-621D-BAT Wireless Speaker 7.4V 1100mAh Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSimolio SM-621, SM-621D, SM-961 — 7.4V Li-Polymer Replacement Battery (SM-621D-BAT)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V, 1100mAh lithium-polymer battery replaces the original pack in Simolio wireless TV speaker systems. It fits the SM-621, SM-621D, and SM-961 models. When the original cell degrades and the speaker stops holding charge, this is the direct replacement.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSM-621 \/ SM-621D \/ SM-961 platform fit:\u003c\/strong\u003e\n    These three models share the same battery bay geometry, connector pinout, and 7.4V nominal rail. The BMS in each unit expects the same cell chemistry and voltage curve, so one pack covers all three.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the SM-621D platform. The BMS completed handshake without error, accepted full charge current from the base, and discharged cleanly across the audio and RF draw combined.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge protocol on the SM-621 base:\u003c\/strong\u003e\n    Seat the speaker in the charging cradle and leave it undisturbed through a complete charge cycle before first use. The SM-621 base logs the new cell during this cycle — skipping it causes the charge indicator to misread and the speaker to cut off earlier than the cell capacity warrants.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station not recognising the new pack after installation\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe SM-621D base uses a BMS handshake to confirm a valid cell is seated before it starts charge current. If the replacement pack arrives at storage voltage — typically around 3.7V per cell — the base may show no charge activity or a blinking error light. This happens because the BMS holds off charge until the cell voltage clears its minimum threshold. Place the speaker in the cradle and wait up to 10 minutes without moving it — the BMS will begin trickle charging once it detects stable cell voltage above approximately 6.0V combined.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSpeaker cuts out mid-use even though the base showed a full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage sag issue, not a capacity issue. The SM-621 draws current simultaneously from the audio amplifier and the RF transmitter — that combined load pulls cell voltage down sharply under peak demand. If the cell has not completed its first full conditioning cycle, internal resistance is still elevated, and the BMS trips the output cutoff before the cell is actually empty. Run three to five full charge-and-discharge cycles through normal use and the cutoff threshold will stabilise. After conditioning, resting cell voltage after a full charge should read at or above 8.3V across the pack terminals.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428100767834,"sku":"BWCS-SML621SL-1","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428100800602,"sku":"BWCS-SML621SL-2","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428100833370,"sku":"BWCS-SML621SL-3","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SML621SL-1.webp?v=1779934133","url":"https:\/\/batteryweb.com\/products\/simolio-wireless-tv-speaker-replacement-battery-74v-1100mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}