{"product_id":"sinomdt-infusion-pump-sn-1600v-replacement-battery-12v-2000mah-ni-mh","title":"SinoMDT Infusion Pump SN-1600V Compatible Battery 12V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSinoMDT Infusion Pump SN-1600V \/ SN-50F6 \/ SN-50C6 — 12V Ni-MH Replacement Battery (JS-12V-2.0AH)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 2000mAh Ni-MH replacement battery carrying OEM part number JS-12V-2.0AH. It fits the SinoMDT Infusion Pump SN-1600V, SN-50F6, and SN-50C6 — a clinical infusion pump used to deliver IV fluids, medications, and nutrients at controlled rates. Capacity is 24Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSN-1600V, SN-50F6, and SN-50C6 compatibility:\u003c\/strong\u003e\n    All three models share the same 12V power rail, the same physical connector, and the same BMS handshake protocol — which is why a single cell pack covers the range. Swapping between these models requires no hardware modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge-discharge cycles on the SN-1600V platform. The BMS accepted the cell chemistry without fault flags, and voltage held steady across the pump's delivery cycles without triggering the under-voltage cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap startup protocol:\u003c\/strong\u003e\n    After installing this battery, let the pump complete its full power-on self-test cycle without interruption. The BMS runs a chemistry verification check at startup — interrupting it mid-sequence can latch a false battery fault that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the SN-1600V flags a low-battery alarm with a fully charged new cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe SN-1600V's charge IC uses a conservative threshold calibrated to the OEM cell's internal resistance profile. A new replacement cell has a slightly different resistance curve until it completes one full charge-discharge cycle. During that first cycle, the pump's BMS may read state-of-charge as lower than actual and trigger a low-battery alarm even when the pack is fully charged. Run one complete charge-discharge cycle before clinical deployment — the alarm clears once the BMS maps the cell's real voltage-capacity curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePump will not power on after the replacement cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge in storage, and if the pack voltage drops below roughly 10.0V the SN-1600V's BMS enters deep-discharge protection and blocks power-on entirely. The pump will show no response — no display, no alarm. Connect the pump to mains power and leave it on charge for a minimum of four hours before attempting to power on. This allows the charger to trickle the cell back above the BMS recovery threshold before normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381422194778,"sku":"BWCS-SPN160MD-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381422227546,"sku":"BWCS-SPN160MD-2","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381422260314,"sku":"BWCS-SPN160MD-3","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SPN160MD-1.webp?v=1778900681","url":"https:\/\/batteryweb.com\/products\/sinomdt-infusion-pump-sn-1600v-replacement-battery-12v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}