{"product_id":"skylink-duos-replacement-battery-37v-1300mah-li-ion","title":"Skylink Duos Replacement Battery 3.7V 1300mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSkylink Duos — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1300mAh Li-ion cell is a direct replacement for the Skylink Duos smartphone. It fits the original battery bay and connects to the device's charge circuit via the stock connector. Capacity figure is sourced from product data at 4.81Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSkylink Duos fit:\u003c\/strong\u003e\n    The Duos uses a compact 60.00 × 38.12 × 5.75mm cell running at 3.7V nominal. This replacement matches that form factor and voltage rail exactly, so the charge IC sees the correct input parameters on first boot.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the bench and monitored BMS cutoff behaviour at both the low-voltage floor and the 4.2V charge ceiling. The protection circuit tripped cleanly at both thresholds with no anomalous heat on the charge IC.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After fitting this cell, disable fast charging and run one full discharge-charge cycle at standard current. This lets the fuel gauge IC map the new cell's discharge curve before the phone starts applying high-current charging into an uncalibrated coulomb counter.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Skylink Duos after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA new cell has a slightly different internal resistance profile than the aged cell the fuel gauge IC was trained on. Under load — modem radio bursts, screen refresh — the voltage drops faster than the IC predicts, crossing the hardware cutoff threshold while the OS still shows 20–30% remaining. The phone interprets this as a sudden power loss, not a calibration gap. Run two full discharge cycles without fast charging to let the coulomb counter re-anchor its zero-percent reference to the new cell's actual voltage floor, typically around 3.0V under load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eOS percentage jumping erratically in the first few days after replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Duos fuel gauge IC stores a learned discharge curve from the previous cell. When a new cell goes in, the stored curve no longer matches actual cell voltage at any given charge state, so the reported percentage can jump several points between readings. This is not a fault with the replacement cell — it is a calibration mismatch in the fuel gauge IC. One complete discharge to auto-off followed by an uninterrupted charge to 100% resets the reference points and stabilises the percentage readout.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404283543642,"sku":"BWCS-DEP365SL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404283576410,"sku":"BWCS-DEP365SL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404283609178,"sku":"BWCS-DEP365SL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DEP365SL-1.webp?v=1779369550","url":"https:\/\/batteryweb.com\/products\/skylink-duos-replacement-battery-37v-1300mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}