{"product_id":"soehnle-testut-t62-type-b250-replacement-battery-12v-2000mah-ni-mh","title":"Soehnle TESTUT T62 Type B250 12V Ni-MH Replacement Battery 785585","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSoehnle TESTUT T62 Type B250 — 12V Ni-MH Replacement Battery (785585)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V 2000mAh (24Wh) Ni-MH replacement battery for the Soehnle TESTUT T62 Type B250 surveying and testing instrument. It slots directly into the T62 battery bay and restores power to the measurement system when the original pack has degraded beyond usable capacity. Voltage and capacity match the OEM specification (785585).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eT62 Type B250 platform fit:\u003c\/strong\u003e\n    The T62 series runs its probe circuits and display stack off a shared 12V rail. Any pack serving this instrument must sustain that rail cleanly during sensor initialisation, where current spikes briefly before settling. This cell configuration handles that draw without tripping the onboard protection circuit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through instrument power-on and probe initialisation sequences. The BMS held the 12V rail stable during the startup current spike and resumed normal cell monitoring within two seconds of settling.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration cycle:\u003c\/strong\u003e\n    After installing, run a full calibration cycle through the instrument menu before field deployment. The T62 maps battery state during calibration — skipping this step causes premature low-battery warnings during your first measurement session, even with a full pack.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the T62 sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH packs self-discharge during storage. If the T62 has been inactive for several months, the pack voltage can drop below the BMS recovery threshold, putting the protection circuit into a locked state. The instrument will not power on, and the charger may show no activity. To recover, connect the charger and leave it undisturbed for at least 30 minutes — most chargers will trickle current into the cells until voltage climbs above the 10V recovery threshold, at which point normal charging resumes.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eReadings resetting or dropping out during a sustained logging session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage sag issue, not a calibration fault. Under continuous sensor load, a worn or partially depleted Ni-MH cell cannot maintain the 12V rail, and the instrument interprets the brief dropout as a power interruption and resets the active log. A fresh pack holds the rail flat under sustained draw. If the symptom persists with a new pack, check that the battery contacts are clean and seating fully — even 0.1Ω of contact resistance causes measurable sag under load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360570048602,"sku":"BWCS-SHT620SL-1","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360570081370,"sku":"BWCS-SHT620SL-2","price":92.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360570114138,"sku":"BWCS-SHT620SL-3","price":100.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SHT620SL-1.webp?v=1778616005","url":"https:\/\/batteryweb.com\/products\/soehnle-testut-t62-type-b250-replacement-battery-12v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}