{"product_id":"sokkia-replacement-battery-74v-2600mah-li-ion","title":"Sokkia BT-66Q Replacement Battery 7.4V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSokkia BT-66Q — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThe BT-66Q is a 7.4V 2600mAh (19.24Wh) Li-ion battery for Sokkia total stations and GPS receivers used in professional surveying and construction. It fits instruments that rely on this pack for field positioning and measurement sessions. Voltage and cell count match the original Sokkia specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSokkia total station and GPS receiver fit:\u003c\/strong\u003e\n    These instruments share a common 7.4V two-cell Li-ion architecture with a matched connector and BMS handshake. The pack slots into the battery compartment and the instrument recognises it through the same communication line as the factory unit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the bench, confirmed BMS protection trips at the correct over-discharge threshold, and verified the instrument accepted the pack without a battery-fault flag on startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eCalibration cycle before first field deployment:\u003c\/strong\u003e\n    After installing this pack, run a full calibration cycle through the instrument menu before heading to the job site. The instrument maps battery state during calibration, and skipping this step causes premature low-battery warnings during the first measurement session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after a Sokkia instrument sat unused in a carry case for months\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge slowly during storage. If the pack drops below roughly 2.5V per cell, the BMS enters a protective sleep state and blocks current flow entirely. The instrument sees no battery and refuses to power on — this is not a dead pack, it is a locked BMS. To recover it, connect the pack to a charger that supports a trickle or recovery mode; most smart chargers will push a low current until the cell voltage climbs above the BMS re-enable threshold, typically around 3.0V per cell, at which point normal charging resumes.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eInstrument shuts down mid-measurement with the battery indicator still showing charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when sustained sensor load — gyro initialisation, EDM ranging, or continuous GPS logging — draws enough current to cause a momentary voltage sag below the instrument's cutoff threshold. The display shows remaining charge because it reads resting voltage, not loaded voltage. A cell that has degraded through repeated shallow cycling cannot hold voltage under load even if it reads fine at rest. Charge the pack fully, then run the instrument through a complete calibration cycle; if shutdown under load continues, the cells have lost capacity and the pack needs replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360782843994,"sku":"BWCS-TOP100XL-1","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360782876762,"sku":"BWCS-TOP100XL-2","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360782909530,"sku":"BWCS-TOP100XL-3","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TOP100XL-1.webp?v=1778616277","url":"https:\/\/batteryweb.com\/products\/sokkia-replacement-battery-74v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}