{"product_id":"sokkia-shc5000-replacement-battery-37v-13600mah-li-ion","title":"Sokkia SHC5000 Replacement Battery 3.7V 13600mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSokkia SHC5000 — 3.7V Li-ion Replacement Battery (25260)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 13600mAh (50.32Wh) Li-ion battery is a direct replacement for the Sokkia SHC5000 field controller. The SHC5000 is a survey-grade data collector used by surveyors and construction crews for total station control, data logging, and site documentation. Voltage and cell chemistry match the OEM specification (Part No. 25260).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSHC5000 platform fit:\u003c\/strong\u003e\n    The SHC5000 runs a single-cell Li-ion architecture at 3.7V nominal. This pack matches that voltage rail and the physical connector orientation exactly. The BMS handshake with the SHC5000's power management circuit was confirmed before listing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack under simulated field load — continuous GPS logging combined with Bluetooth data transfer — and confirmed the BMS held within the SHC5000's accepted voltage window without triggering a protection cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration cycle:\u003c\/strong\u003e\n    After fitting this battery, run a full calibration cycle through the SHC5000's instrument menu before your first field session. The device maps battery state during that routine, and skipping it causes premature low-battery warnings to appear mid-measurement even when capacity is adequate.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSHC5000 BMS cutoff when the total station connection initialises\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the SHC5000 wakes a connected total station via Bluetooth or cable, the device draws a sharp initialisation current in the first 200–400ms. If the battery's BMS has a conservative peak-current threshold — common in heavily discharged or cold packs — this spike trips the protection circuit before the handshake completes. The controller then shows a communication error rather than a battery error, which makes the root cause easy to misread. Warm the pack to above 15°C and charge it above 3.5V before connecting the instrument.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePack won't charge after the SHC5000 sat unused in the carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eExtended storage at low state-of-charge drops cell voltage below the BMS recovery threshold — typically under 2.5V — and the protection circuit latches into sleep mode. The SHC5000 charger may show no activity or a fault LED because the BMS is not presenting voltage to the charge circuit. Some chargers can recover the pack by applying a low pre-charge current for 5–10 minutes; if yours cannot, connect the pack to a Li-ion recovery charger set to 3.0V pre-charge until the cell voltage climbs above 2.8V, then switch to standard charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360727924826,"sku":"BWCS-JUP700XL-1","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360727957594,"sku":"BWCS-JUP700XL-2","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360727990362,"sku":"BWCS-JUP700XL-3","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-JUP700XL-1.webp?v=1778616209","url":"https:\/\/batteryweb.com\/products\/sokkia-shc5000-replacement-battery-37v-13600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}