{"product_id":"sonel-pat-10-replacement-battery-74v-2600mah-li-ion","title":"Sonel PAT-10 Replacement Battery 7.4V 2600mAh Li-ion WAAKU19","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSonel PAT-10 \/ PAT-2 — 7.4V Li-ion Replacement Battery (WAAKU19)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V, 2600mAh Li-ion battery replaces the WAAKU19 cell in the Sonel PAT-10 and PAT-2 portable printers. These are compact field printers used in logistics, inspection, and retail environments where mains power is unavailable. Voltage and capacity match OEM spec directly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePAT-10 and PAT-2 shared battery platform:\u003c\/strong\u003e\n    Both models run the same 7.4V two-cell Li-ion pack with an identical connector and BMS handshake protocol. Sonel consolidated the battery across this printer line, so one cell serves both units without any modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on compatible hardware and confirmed the BMS accepted the cell, released the charge lock, and drove the paper feed motor without a protection trip at startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use print sequence:\u003c\/strong\u003e\n    After installing, charge the battery fully and print five test pages before deploying in the field. The paper feed motor draws a short current spike on each print job, and running that sequence confirms the BMS has profiled the new cell correctly and will not cut out mid-job under motor load.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the PAT-10 stops printing after sitting unused for several weeks\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge at roughly 2–3% per month under storage conditions. If the PAT-10 sits unused long enough, the cell voltage drops below the BMS minimum motor-drive threshold — typically around 6.0V for a 7.4V nominal pack. At that point the printer powers on but the feed motor does not engage, so the device appears functional while producing nothing. Connecting to the charger for a full cycle before use restores the cell above the drive threshold and clears the fault state.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFaded or uneven print output on a battery that still shows charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe thermal print head in the PAT-10 and PAT-2 requires a stable voltage to maintain consistent head temperature across the full print width. As a Li-ion cell ages, internal resistance rises — voltage sags during the current draw of each print line, and the head temperature fluctuates slightly as a result. The output shows as faded bands or inconsistent darkness across the receipt, even though the battery indicator still reads partial charge. If cleaning the head does not resolve it, check resting cell voltage: a healthy 7.4V pack should read above 7.8V fully charged.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415998857306,"sku":"BWCS-PBA300SL-1","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415998890074,"sku":"BWCS-PBA300SL-2","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415998922842,"sku":"BWCS-PBA300SL-3","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PBA300SL-1.webp?v=1779759080","url":"https:\/\/batteryweb.com\/products\/sonel-pat-10-replacement-battery-74v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}