{"product_id":"sony-dcr-30-replacement-battery-74v-680mah-li-ion","title":"Sony NP-FP51D Replacement Battery 7.4V 680mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSony DCR-30 \/ DCR-DVD Series — 7.4V Li-ion Replacement Battery (NP-FP51D)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 680mAh lithium-ion replacement for the Sony NP-FP51D battery pack. It fits the DCR-30, DCR-DVD103, DCR-DVD202E, DCR-DVD203, and 58 additional Sony camcorder models in the DCR series. Voltage and cell chemistry match the OEM specification exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDCR-DVD series compatibility:\u003c\/strong\u003e\n    These camcorders share the same 7.4V battery bay, connector pinout, and BMS communication protocol across the range. One cell format covers the full lineup because Sony standardised the NP-FP51D footprint across this generation of DVD-based camcorders.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on DCR-series bodies. The BMS handshake completed without error, charge acceptance was normal, and the protection circuit tripped correctly at low-voltage cutoff — no false flags during recording or playback loads.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on the DCR body:\u003c\/strong\u003e\n    Insert the battery and run a full charge directly through the camcorder body or Sony OEM charger before your first shoot. Some DCR-series BMS firmware requires one complete charge cycle from within the host device to calibrate the battery-remaining indicator accurately.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSony DCR camcorder rejecting a third-party cell on first install\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eSony's DCR-series bodies use a BMS authentication check on startup. A fresh replacement cell with a partial state of charge can trigger a \"no battery\" or \"incompatible battery\" flag even when the cell is electrically sound. The camera reads the cell's voltage at the moment of insertion and compares it against expected thresholds. If the resting voltage sits outside the expected window — common with a new cell that shipped at storage charge — the body rejects it before the communication handshake completes. Fix: place the battery in the OEM charger first, bring it to full charge, then insert it into the camcorder body.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the DCR display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DCR series maps remaining charge using voltage-threshold lookups tied to the discharge curve of the original NP-FP51D cell. A replacement cell with a slightly different internal resistance or discharge profile causes the indicator to jump — showing 60%, then 80%, then 40% within minutes. This is a calibration mismatch between the new cell's actual discharge curve and the camera's stored voltage map. Run two full charge-discharge cycles through the camcorder body to let the BMS recalibrate. After the second cycle, readings stabilise and track accurately to the 3.0V per-cell cutoff floor.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333814222938,"sku":"BWCS-FP51D-1","price":27.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43333814255706,"sku":"BWCS-FP51D-2","price":31.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43333814288474,"sku":"BWCS-FP51D-3","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FP51D-big.webp?v=1778213246","url":"https:\/\/batteryweb.com\/products\/sony-dcr-30-replacement-battery-74v-680mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}