{"product_id":"sony-dcr-dvd908e-replacement-battery-74v-1300mah-li-ion","title":"Sony NP-FH70 Camcorder Replacement Battery 7.4V 1300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSony DCR-DVD908E \/ HDR-HC7E Series — 7.4V Li-ion Replacement Battery (NP-FH70)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 1300mAh Li-ion cell built to the NP-FH70 form factor. It fits the DCR-DVD908E DVD camcorder, the HDR-HC7E, DCR-HC47, DCR-SR220D, and over 220 compatible Sony camcorder bodies. Voltage and connector match the OEM spec — the camera body and charger treat it as a direct swap.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNP-FH70 platform compatibility:\u003c\/strong\u003e\n    Sony's InfoLITHIUM H-series share a common connector pinout and BMS communication protocol. The DCR-DVD908E, HDR-HC7E, and their siblings all draw from the same voltage rail and handshake sequence, which is why one cell covers the full range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on compatible Sony camcorder bodies. The BMS accepted the cell without rejecting the handshake, capacity readout initialised correctly after the first full charge cycle, and the protection circuit tripped cleanly at the expected low-voltage cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on DCR-DVD908E:\u003c\/strong\u003e\n    Charge this cell fully inside the camera body or OEM charger before your first recording session. The DCR-DVD908E's InfoLITHIUM display needs one complete charge cycle to map the new cell's discharge curve — skipping this causes the remaining-charge indicator to read inaccurately from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSony InfoLITHIUM BMS rejecting a third-party NP-FH70 on first install\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSony's InfoLITHIUM system uses a data pin on the NP-FH70 connector to communicate charge state back to the camera body. On first install with a replacement cell, the camera sometimes displays a warning or refuses to power on — this is a BMS initialisation check, not a fault with the cell. Inserting the battery and charging via the OEM charger or the camera body's USB\/AC port for one full cycle clears the handshake flag. After that cycle, the camera body stores the cell profile and powers on without the warning.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping or freezing mid-recording on the DCR-DVD908E\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe InfoLITHIUM indicator on the DCR-DVD908E maps remaining capacity by reading cell voltage against a stored discharge curve. A new replacement cell has a slightly different discharge curve shape than a well-used OEM cell, so the percentage readout can jump or stall — particularly in the 40–60% range — until the camera recalibrates. Run two or three full charge-to-discharge cycles without interruption and the camera's calibration table updates. After calibration, the indicator tracks accurately down to the 7.0V low-voltage cutoff where the body shuts down to protect the cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333917507674,"sku":"BWCS-FH70D-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333917540442,"sku":"BWCS-FH70D-2","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333917573210,"sku":"BWCS-FH70D-3","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FH70D-1.webp?v=1778213576","url":"https:\/\/batteryweb.com\/products\/sony-dcr-dvd908e-replacement-battery-74v-1300mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}