{"product_id":"sony-dcr-dvd92-replacement-battery-74v-1800mah-li-ion","title":"Sony NP-FP80 Camcorder Replacement Battery 7.4V 1800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSony DCR-DVD92 \/ DCR-HC16 Series — 7.4V Li-ion Replacement Battery (NP-FP80)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 1800mAh lithium-ion replacement for the Sony NP-FP80 battery. It fits the DCR-DVD92, DCR-DVD92E, DCR-HC16, DCR-HC16E, and over 60 additional Sony camcorder models in the DCR family. The cell slots into the same battery bay and connects via the same multi-pin interface as the original.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDCR-DVD and DCR-HC platform fit:\u003c\/strong\u003e\n    Sony's DCR-DVD and DCR-HC camcorders share a common 7.4V battery rail and the same NP-FP series multi-pin connector with BMS data line. Any model in these series that accepts the NP-FP80 form factor will work with this cell — the pin layout and communication protocol do not differ across the range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on a DCR-HC16 body. The BMS handshake completed on the first connection, charge acceptance was normal via the camcorder's internal charger, and the battery-remaining indicator responded correctly through the discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on DCR camcorders:\u003c\/strong\u003e\n    Charge this battery from within the camcorder body before your first recording session. Sony's NP-FP series BMS maps voltage thresholds to the battery-remaining display during an in-body charge cycle — skipping this step can cause the indicator to read inaccurately for the first few uses.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the DCR-DVD92 rejects a new NP-FP80 cell on first install\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eSony's DCR-DVD series performs a BMS authentication check the first time a new cell is seated. If the camcorder has not completed a charge handshake with the new battery, it may display a battery error or refuse to power on entirely. This is not a fault with the cell — it is the camera's protection circuit waiting for a valid charge cycle to confirm the battery is within safe operating parameters. Connect the camcorder to AC power with the new battery installed and allow a full charge to complete before attempting to record.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the DCR-HC16 display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DCR-HC16 maps its battery-remaining display against a voltage-threshold table calibrated to the original NP-FP80's discharge curve. A new replacement cell may have a slightly different mid-range voltage slope, causing the indicator to skip between levels rather than stepping down smoothly. This settles after two to three full charge and discharge cycles, once the BMS has enough data points to track the new cell's curve accurately. If the jumping persists after three cycles, check that the battery contacts on the camcorder body are clean and making firm contact — use a dry cloth to wipe the gold pins before reseating the battery.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333924094042,"sku":"BWCS-FP80-1","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333924126810,"sku":"BWCS-FP80-2","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333924159578,"sku":"BWCS-FP80-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FP80_1.webp?v=1778213576","url":"https:\/\/batteryweb.com\/products\/sony-dcr-dvd92-replacement-battery-74v-1800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}