{"product_id":"sony-dcx200-replacement-battery-24v-700mah-ni-mh","title":"Sony BT-1008 Cordless Phone Compatible Battery 2.4V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSony DCX200 — 2.4V Ni-MH Replacement Battery (BT-1008)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 700mAh Ni-MH replacement battery for the Sony DCX200 cordless phone handset. It replaces the original BT-1008 pack when talk time has degraded from repeated charge cycles. Dimensions are 46.46 x 23.00 x 10.61mm — a direct physical match for the DCX200 battery compartment.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDCX200 handset compatibility:\u003c\/strong\u003e\n    The DCX200 runs a 2.4V Ni-MH chemistry with a fixed connector orientation. This pack matches the voltage rail and physical form factor the handset expects — no modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the DCX200 platform. The BMS handshake with the base station completed normally and the handset registered a full charge state after the conditioning sequence.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base for a full 16-hour charge before first use. NiMH cells in cordless phones need a slow initial charge to reach rated capacity — cutting it short will leave you with less talk time than the pack can actually deliver.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells ship in a partially discharged state and need three to five full charge-discharge cycles before they hit rated capacity. The DCX200 base charges at a low trickle rate, so each cycle takes time. Do not judge the pack after the first use — put it through at least three complete cycles before drawing any conclusions. By cycle five, capacity should be within 10% of the rated 700mAh.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge or flashes an error light after swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA NiMH pack that has sat in storage drops below the voltage threshold the base station uses to confirm a valid battery is present. The DCX200 base may refuse to charge or flash an error light when it sees this low resting voltage. Remove the handset, wait 30 seconds, and reseat it firmly — the base re-checks voltage on contact. If the error persists, the pack needs a brief external boost charge to lift it above 2.0V before the base will accept it.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340046631002,"sku":"BWCS-UT2060CL-1","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340046663770,"sku":"BWCS-UT2060CL-2","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340046696538,"sku":"BWCS-UT2060CL-3","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-UT2060CL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/sony-dcx200-replacement-battery-24v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}