{"product_id":"sony-pmw-ex330-replacement-battery-148v-6400mah-li-ion","title":"Sony BP-V95 PMW-EX330 Replacement Battery 14.8V 6400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSony PMW-EX330 \/ PMW-F5 Series — 14.8V Li-ion Replacement Battery (BP-V95)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.8V, 6400mAh (94.72Wh) Li-ion replacement for the Sony BP-V95 battery pack. It fits the PMW-EX330, PMW-F5, PMW-F55, and PMW-400 professional camcorders. These are broadcast-grade shoulder-mount and handheld cameras used in demanding field and studio production environments.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePMW-EX330, PMW-F5, PMW-F55, PMW-400 compatibility:\u003c\/strong\u003e\n    These camcorders share the same V-mount interface, 14.8V nominal rail, and BMS handshake protocol. The BP-V95 form factor and pin configuration are consistent across this platform, so one cell fits the full range without adapters.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the PMW platform. The BMS completed authentication on first charge via OEM charger, voltage output held stable across a load draw representing concurrent sensor, codec, and cooling fan operation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle initialisation on PMW bodies:\u003c\/strong\u003e\n    Insert the battery and run a full charge cycle through an OEM Sony charger before the first shoot. Some PMW body firmware will not display accurate remaining capacity until it has mapped the discharge curve of the new cell through at least one complete charge-from-empty sequence.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the PMW-EX330 shows a dead battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe PMW-EX330 maps its battery indicator to voltage thresholds calibrated against the original BP-V95 discharge curve. A new third-party cell may present a slightly different internal resistance profile, causing the camera to read a lower state of charge than is actually present. This is a display calibration issue, not a capacity defect. Run two full charge-discharge cycles through an OEM charger and the indicator mapping will normalise against the new cell's curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePMW camera body displaying \"no battery\" or rejecting a new cell on first install\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSony PMW bodies perform a BMS authentication check on every new battery insertion. If the cell arrives partially discharged from storage, the camera may fail this handshake and show a rejection warning. Remove the battery, place it in an OEM Sony charger until it reaches a full charge state (indicator solid green), then reinsert. The camera body should complete authentication and accept the cell. If rejection persists, check that the V-mount contacts are clean and the cell is seated fully — the contact block on the PMW-EX330 requires firm engagement to 14.8V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333638783066,"sku":"BWCS-SBP950MC-1","price":164.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333638815834,"sku":"BWCS-SBP950MC-2","price":190.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333638848602,"sku":"BWCS-SBP950MC-3","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SBP950MC-1.webp?v=1778213032","url":"https:\/\/batteryweb.com\/products\/sony-pmw-ex330-replacement-battery-148v-6400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}