{"product_id":"sony-replacement-battery-74v-5200mah-li-ion","title":"Sony NP-F730 Replacement Battery 7.4V 5200mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSony NP-F730 \/ NP-F750 \/ NP-F770 — 7.4V Li-ion Replacement Battery (NP-F730, NP-F750, NP-F770, NP-F774)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 5200mAh (38.48Wh) Li-ion battery built to the NP-F series form factor. It fits Sony camcorders and professional video cameras that use the NP-F connector and BMS protocol. The cell replaces OEM part numbers NP-F730, NP-F750, NP-F770, and NP-F774.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNP-F series platform compatibility:\u003c\/strong\u003e\n    The NP-F730, NP-F750, NP-F770, and NP-F774 share the same physical connector, voltage rail, and BMS communication lines. Any camera body or accessory — on-camera monitor, LED light, or rig — expecting NP-F series will draw from the same 7.4V bus this battery provides.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through Sony NP-F compatible devices and logged BMS handshake, charge acceptance, and cell voltage at rest. The protection circuit responded correctly to both low-voltage cutoff and overcharge events at each stage.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on NP-F bodies:\u003c\/strong\u003e\n    Run one full charge directly in the Sony camera body or OEM charger before shooting. Some Sony BMS implementations require an internal charge cycle to calibrate the battery-remaining indicator — skipping this step can cause the display to read incorrectly for the first several uses.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSony camera body rejecting a valid NP-F replacement on first install\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eSony camcorders and video cameras use a BMS authentication routine that runs on first contact with a new cell. If the body has never seen this specific cell's internal resistance signature, it can flag the battery as unrecognised and refuse to power on. This is a one-time initialisation issue, not a defect. Insert the battery and charge it fully in the Sony body — do not pull it mid-charge. After one complete charge cycle, the body maps the new cell and accepts it for normal operation.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping or reading incorrectly mid-session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSony's battery indicator maps percentage to a voltage-threshold curve calibrated against the original OEM cell's discharge profile. A replacement cell with a slightly different discharge curve hits those thresholds at different state-of-charge points, causing the indicator to jump — often dropping from 60% to 20% with no warning. This is a display calibration issue, not a capacity problem. Run two to three full charge and discharge cycles through the camera body to allow the BMS to remap the thresholds against the new cell's actual curve. After conditioning, percentage readout stabilises at real cell voltage of approximately 7.2V at mid-charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333599166554,"sku":"BWCS-F750MU-1","price":52.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333599199322,"sku":"BWCS-F750MU-2","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333599232090,"sku":"BWCS-F750MU-3","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-F750MU-1.webp?v=1778212975","url":"https:\/\/batteryweb.com\/products\/sony-replacement-battery-74v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}