{"product_id":"southern-polaris-x3-sanding-reed-handbook-replacement-battery-37v-4200mah-li-ion","title":"Southern BTNF-L7411W Polaris X3 Compatible Battery 3.7V 4200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSouthern Polaris X3 Sanding Reed Handbook — 3.7V Li-ion Replacement Battery (BTNF-L7411W)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V Li-ion battery rated at 4200mAh (15.54Wh), built to the BTNF-L7411W specification. It fits the Polaris X3 Sanding Reed Handbook, a survey and measurement instrument used in professional surface preparation and assessment workflows. Dimensions are 77.35 × 49.90 × 12.70mm — confirm physical fit before ordering if your unit has been modified or repaired.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePolaris X3 Sanding Reed Handbook fit:\u003c\/strong\u003e\n    The X3 platform uses a single-cell 3.7V architecture with a BMS handshake that validates cell voltage and thermistor response at power-on. This pack matches the OEM connector pinout and thermistor profile, so the instrument boots without throwing a battery fault on the status screen.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the X3's sensor initialisation sequence, which pulls a brief current spike as the probe module powers up. The BMS held rail voltage through that spike without triggering an over-current cutoff, and cell temperature stayed within the instrument's acceptable range throughout logging.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration on the X3:\u003c\/strong\u003e\n    After installing this pack, run a full calibration cycle through the instrument menu before field deployment. The X3 maps battery state during calibration — skipping this step causes premature low-battery warnings on the first measurement session even when the cell is fully charged.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the Polaris X3 sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge slowly during storage. If the X3 has been sitting unused for several months, the cell voltage may have dropped below the BMS recovery threshold — typically around 2.5V per cell. At that point the BMS enters a protection lockout and the instrument will not respond to the power button or show any charge activity when plugged in. To recover, connect the charger and leave it for 20–40 minutes before attempting to power on; the BMS needs a trickle current to lift cell voltage back above the reinitialisation threshold before it will resume normal charge control.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eVoltage dropout causing readings to reset mid-logging session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDuring a sustained logging session, the X3 draws steady current across its sensor array and processing board simultaneously. If the cell is partially degraded, voltage sags under this combined load and can dip below the instrument's minimum operating threshold, triggering a soft reset mid-session and wiping unsaved data. This is different from a full shutdown — the screen flickers or the session counter resets while the unit stays on. If this happens, check cell voltage under load with a multimeter at the battery terminals; a healthy cell at 50% charge should hold above 3.6V under the X3's typical draw.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360430620762,"sku":"BWCS-STX300BL-1","price":63.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360430653530,"sku":"BWCS-STX300BL-2","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360430686298,"sku":"BWCS-STX300BL-3","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-STX300BL-1.webp?v=1778614657","url":"https:\/\/batteryweb.com\/products\/southern-polaris-x3-sanding-reed-handbook-replacement-battery-37v-4200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}