{"product_id":"southwestern-bell-s6051-replacement-battery-6v-1500mah-ni-mh","title":"Southwestern Bell S6051 Cordless Phone Ni-MH Replacement Battery 6V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSouthwestern Bell S6051 — 6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 6V 1500mAh Ni-MH battery replaces the rechargeable pack in the Southwestern Bell S6051 cordless handset. It restores full wireless operation when the original cell can no longer hold a usable charge. Voltage and cell count match the original pack exactly, so the base station charges it through the standard contacts.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eS6051 handset fit:\u003c\/strong\u003e\n    The S6051 uses a 6V Ni-MH pack with a specific contact orientation and physical envelope — 73.90 × 48.95 × 14.43mm. This replacement matches those dimensions so the battery door closes flush and the charge contacts align with the cradle terminals.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a Ni-MH test rig. The BMS held stable across five full cycles, with capacity settling near rated 1500mAh by cycle three — consistent with normal Ni-MH conditioning behaviour.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on the S6051:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells arrive partially discharged from storage. A slow first charge lets the cells reach full capacity rather than locking in a lower ceiling from a rushed partial fill.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange loss on the S6051 after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH voltage drops under RF load — when the handset transmits, it pulls current in short bursts. A new but unconditioned pack sags in voltage more than a fully cycled one. That sag causes the transmit circuit to back off power to stay within operating limits, which cuts effective range. Run three to five full charge and discharge cycles through the base station and the sag narrows, restoring transmit stability.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge light after fitting new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH packs lose voltage during storage — if the cell voltage drops far enough, the S6051 base station's charging circuit does not recognise it as a valid battery and withholds charge current. Remove the handset, leave it out of the base for 30 seconds, then re-seat it firmly so both contacts are clean and flush. If the charge light still does not appear, the cell voltage may be below the base acceptance threshold — place a DMM across the contacts and confirm you're reading above 4.8V before concluding there's a fault elsewhere.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339940331610,"sku":"BWCS-BT910CL-1","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339940364378,"sku":"BWCS-BT910CL-2","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339940397146,"sku":"BWCS-BT910CL-3","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BT910CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/southwestern-bell-s6051-replacement-battery-6v-1500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}