{"product_id":"spectralink-hcp-1000-replacement-battery-36v-250mah-ni-mh","title":"SpectraLink HCP-1000 Replacement Battery 3.6V 250mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSpectraLink HCP-1000 \/ HCP-2000 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 250mAh Ni-MH replacement battery for the SpectraLink HCP-1000 and HCP-2000 cordless DECT handsets. Both models use the same cell format, voltage rail, and physical footprint. It restores normal talk time and standby performance when the original cell has degraded.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHCP-1000 and HCP-2000 compatibility:\u003c\/strong\u003e\n    Both handsets run the same 3.6V three-cell NiMH pack with an identical connector and housing. The base station charges both handsets the same way — no firmware or BMS handshake differences between these two models.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on bench equipment at 3.6V nominal. The BMS accepted charge from the first cycle and held voltage within spec across multiple discharge runs. No cell reversal was detected under load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells ship at partial charge — a slow full charge on the first cycle is what lets the cells reach rated capacity.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing charging error on a new NiMH pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSpectraLink base stations check incoming voltage before starting the charge cycle. A new NiMH pack that has been sitting in storage can drop below the base's acceptance threshold — sometimes under 3.0V — which triggers a fault light or error state. This is not a defective battery. Remove the handset, wait 30 seconds, reseat it firmly, and the base will retry the voltage check. If the fault clears within one or two attempts, the charge cycle will proceed normally.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after replacing the battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells take three to five full charge-discharge cycles before they reach rated capacity — this is normal chemistry behaviour, not a fault. A fresh pack that feels weak in the first day or two just needs conditioning. Run the handset down to low-battery warning, then place it in the base for a full charge each time. By cycle five, talk time should match the rated capacity of 250mAh.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339930927194,"sku":"BWCS-CPB479CL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339930959962,"sku":"BWCS-CPB479CL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339930992730,"sku":"BWCS-CPB479CL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CPB479CL_1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/spectralink-hcp-1000-replacement-battery-36v-250mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}