{"product_id":"sprint-zing-replacement-battery-37v-1500mah-li-ion","title":"Sprint Zing Mobile Hotspot Replacement Battery 3.7V 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSprint Zing \/ AirCard 753S \/ AirCard 754S — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1500mAh lithium-ion battery replaces the original cell in the Sprint Zing mobile hotspot and the Sierra Wireless AirCard 753S and 754S. All three devices share the same battery bay dimensions and connector, so one cell covers the full range. Capacity is rated at 5.55Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eZing, 753S, and 754S compatibility:\u003c\/strong\u003e\n    These three hotspot models share the same PCB layout, connector pinout, and BMS communication protocol. The voltage rail is identical across all variants, so the battery slots in and the BMS handshake completes without any firmware mismatch.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell in a Zing unit with five devices connected simultaneously. The BMS held stable at load without tripping the low-voltage cutoff, and the protection circuit responded correctly to a simulated overload event.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eVentilation during extended hotspot sessions:\u003c\/strong\u003e\n    When connected devices are far from the hotspot, the cellular radio pushes to maximum transmit power. Keep the device on an open surface — not in a bag or pocket — during long sessions. Trapped heat accelerates cell degradation faster than almost any other usage pattern on this hardware.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Zing drops all connected devices mid-session on a new battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen five or more devices are connected and the cellular signal is weak, the modem and WiFi radio draw peak current simultaneously. This can pull the cell voltage down sharply enough that the BMS interprets it as an unsafe discharge event and cuts output. A worn original battery makes this worse, but even a new cell will trip the cutoff if signal strength stays below two bars for an extended period. Moving the hotspot closer to a window typically restores stable current draw and prevents the cutoff from triggering.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eZing won't power on after sitting unused for several weeks\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLithium-ion cells self-discharge during storage. If the Zing sat unused long enough for the cell to drop below approximately 3.0V, the BMS will block startup to protect the cell from deep-discharge damage. Connect the hotspot to its original charger and leave it for at least 20–30 minutes before pressing the power button — the charger needs to bring the cell back above the minimum boot threshold first. If the LED still does not respond after that time, check that the charger output reads 5V using a USB meter.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377888100442,"sku":"BWCS-SWA883RC-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377888133210,"sku":"BWCS-SWA883RC-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377888165978,"sku":"BWCS-SWA883RC-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SWA883RC-1.webp?v=1778773940","url":"https:\/\/batteryweb.com\/products\/sprint-zing-replacement-battery-37v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}