{"product_id":"stealth-cam-deceptor-max-replacement-battery-111v-3400mah-li-ion","title":"Stealth Cam STC-RLCMAX Deceptor Max Replacement Battery 11.1V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eStealth Cam Deceptor Max \/ FieldMax Series — 11.1V Li-ion Replacement Battery (STC-RLCMAX)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 11.1V 3400mAh Li-ion battery for Stealth Cam trail cameras including the Deceptor Max, FieldMax, Flashback, and Fusion Max. It replaces OEM part STC-RLCMAX directly. Use it in remote field locations where the original pack has drained during extended wildlife monitoring sessions.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMulti-model fit across the Deceptor and FieldMax platform:\u003c\/strong\u003e\n    The Deceptor Max, FieldMax, Flashback, and Fusion Max all run the same 11.1V three-cell architecture with a shared connector and BMS handshake — that is why one pack covers this group of cameras.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the STC-RLCMAX platform. The BMS responded correctly to cell voltage thresholds, and the camera recognised the pack without firmware prompts.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eCold-field pre-warm tip:\u003c\/strong\u003e\n    Li-ion cells lose 15–25% capacity at 0°C and up to 40% at –20°C. Before heading to the stand in freezing temperatures, keep this battery in an inner jacket pocket. Swap it into the camera just before mounting — a cold battery left inside an unheated housing overnight will start the day significantly under capacity.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Deceptor Max misses triggers after a cold night in the field\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Deceptor Max draws a short burst of power each time its PIR sensor fires and the image processor spins up. In cold conditions, internal cell resistance rises, and that burst causes a sharper voltage sag than the same draw at room temperature. If the sag drops close to the BMS low-voltage cutoff, the camera may stall mid-trigger or skip captures entirely — without showing a low-battery indicator. The fix is starting the day with a warm, fully charged pack and swapping batteries before the temperature drops below –10°C.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera shows full charge then shuts off after a few captures\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is classic shallow-cycle capacity fade on a Li-ion pack that has been repeatedly topped off without full discharge cycles. The fuel gauge reads the surface charge on the cells, not true capacity — so the indicator lies. The BMS then hits its real low-voltage floor within a handful of trigger events and cuts power. Condition the new pack with two full charge-and-discharge cycles before field deployment, and check resting cell voltage sits above 11.0V before mounting the camera.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416238325850,"sku":"BWCS-STC100MC-1","price":76.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416238358618,"sku":"BWCS-STC100MC-2","price":90.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416238391386,"sku":"BWCS-STC100MC-3","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-STC100MC_1.webp?v=1779761131","url":"https:\/\/batteryweb.com\/products\/stealth-cam-deceptor-max-replacement-battery-111v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}