{"product_id":"stiga-sab-24-ae-replacement-battery-24v-2000mah-li-ion","title":"Stiga SAB 24 AE Replacement Battery 24V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eStiga SAB 24 AE \/ SC 24 AE \/ SGT 24 AE \/ SHT 24 AE — 24V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 24V 2000mAh (48Wh) lithium-ion replacement battery for the Stiga SAB 24 AE cordless lawn mower and its platform siblings. It slots into the same battery bay and runs on the same 24V rail. Fits the SAB 24 AE, SC 24 AE, SGT 24 AE, and SHT 24 AE.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShared 24V platform compatibility:\u003c\/strong\u003e\n    The SAB 24 AE, SC 24 AE, SGT 24 AE, and SHT 24 AE all draw from the same 24V battery system. The connector format, cell voltage rails, and BMS communication protocol are consistent across the range, so one battery services all four tools.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and discharge cycles on a 24V Stiga platform. The BMS held overcurrent cutoff within spec on motor-start inrush and recovered cleanly after full discharge without requiring a manual reset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBreak-in load procedure:\u003c\/strong\u003e\n    On first use, run the mower at a light cutting load for two cycles before tackling dense or wet grass. This gives the BMS time to profile the motor's inrush current draw and set overcurrent thresholds accurately before you push the deck into heavy material.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on the SAB 24 AE during motor-start inrush\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you engage the cutting deck, the motor pulls a short inrush spike that can be three to five times the steady-state current draw. On a new pack — or one returning from storage — the BMS has not yet profiled that spike against the motor's characteristics. If the spike exceeds the BMS threshold, the pack trips and the deck stops immediately after trigger engagement. Running two break-in cycles at light load lets the BMS log the inrush curve and adjust protection thresholds before you hit full load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger not recognising the pack after storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells left unused for several months can drop below the charger's acceptance voltage floor — typically around 2.5V per cell. When this happens, the charger sees a pack that looks over-discharged or faulty and refuses to initiate a charge cycle. Some Stiga chargers will show a blinking or solid fault LED instead of beginning the charge sequence. To recover the pack, connect it to the charger and leave it for 30 minutes without interruption — many chargers run a low-current trickle pre-charge at around 0.1A to bring cells back above the 2.5V threshold before switching to the main charge rate.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416007573594,"sku":"BWCS-GWP240PW-1","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416007606362,"sku":"BWCS-GWP240PW-2","price":104.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416007639130,"sku":"BWCS-GWP240PW-3","price":115.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/batteryweb.com\/products\/stiga-sab-24-ae-replacement-battery-24v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}