{"product_id":"suntech-ct40-monitor-replacement-battery-74v-7800mah-li-ion","title":"SunTech CT40 Monitor Compatible Battery 7.4V 7800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSunTech CT40 Monitor — 7.4V Li-ion Replacement Battery (9005BAT)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 7800mAh Li-ion battery replaces the original power cell in the SunTech CT40 patient monitor. The CT40 is a medical-grade vital signs monitor used in hospital wards, clinics, and ambulatory care settings. OEM part numbers covered: 9005BAT, 120044-O, ND2057HD34, and SUN17-0022-00.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCT40 platform fit:\u003c\/strong\u003e\n    All four OEM part numbers reference the same 7.4V cell block with identical connector pinout and BMS handshake protocol. The CT40's charge IC communicates with the battery's protection circuit to confirm cell chemistry before enabling the charging rail — any cell outside the accepted voltage window is rejected at startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through full charge and discharge on a CT40 unit. The BMS completed its verification pass on the first charge cycle, and the charge indicator advanced to 100% without fault flags on the second cycle once the cell chemistry was recognised by the charge IC.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap self-test protocol:\u003c\/strong\u003e\n    After installing this battery, allow the CT40 to complete its full power-on self-test without interrupting the boot sequence. The device runs BMS verification during startup — cutting power mid-sequence registers a false battery fault that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCT40 not completing boot sequence after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe CT40 runs a BMS handshake during its boot cycle that checks cell voltage, chemistry flag, and protection circuit continuity. A new cell that has partially self-discharged during storage may sit just inside or outside the BMS acceptance threshold, causing the device to stall mid-boot. Before first use, charge the battery fully in-device until the indicator reads 100%, then power on without removing the charger. If the boot stall repeats, pull the battery, rest it for five minutes, reinsert, and allow the charge IC to re-initialise from 0%.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCT40 triggering low-battery alarm immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis alarm fires when the BMS self-test threshold — calibrated to the discharge curve of a conditioned OEM cell — does not yet match the new cell's reported state of charge. On the first cycle, the charge IC applies a conservative current limit, and the cell's voltage curve sits slightly outside the expected profile. Run one complete charge-discharge cycle before clinical use; after that cycle the BMS updates its learned capacity baseline. The alarm clears once the reported SoC and the BMS threshold are aligned, typically confirmed when resting cell voltage holds above 7.2V at end of discharge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43303973159002,"sku":"BWCS-ADC260MD-1","price":91.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43303973191770,"sku":"BWCS-ADC260MD-2","price":107.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43303973224538,"sku":"BWCS-ADC260MD-3","price":119.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ADC260MD_1.webp?v=1777520716","url":"https:\/\/batteryweb.com\/products\/suntech-ct40-monitor-replacement-battery-74v-7800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}