{"product_id":"svp-cdc-650-replacement-battery-37v-850mah-li-ion","title":"SVP CDC-650 Replacement Battery 3.7V 850mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSVP CDC-650 \/ CDC-8640 \/ HDDV-2880 \/ SX-650 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 850mAh Li-ion cell replaces the original battery in SVP compact digital cameras across the CDC-650, CDC-8640, HDDV-2880, and SX-650 lines, plus eight additional compatible models. It fits the same footprint — 40.20 × 35.30 × 6.10mm — as the factory cell. Use it when the original no longer holds a charge or fails to register in the camera body.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMulti-model fit across the SVP compact line:\u003c\/strong\u003e\n    These SVP cameras share the same battery bay dimensions, 3.7V supply rail, and connector orientation, which is why one cell works across the full model range. The BMS in each body reads voltage and current draw the same way — no hardware changes needed between models.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on a compatible SVP body. The BMS accepted the cell without fault codes, held a stable voltage curve through mid-discharge, and triggered the low-battery cutoff cleanly at the expected threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install charge cycle on SVP bodies:\u003c\/strong\u003e\n    Insert the new cell and charge it fully inside the camera body before shooting. Some SVP BMS firmware maps the battery-remaining indicator by tracking a complete charge curve from within the body — skipping this step can cause the indicator to display inaccurately from the first use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash not fully recycling between shots on a fresh SVP cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe flash capacitor in SVP compact bodies draws a short but heavy burst of current each time it recharges between shots. If the cell's internal resistance is elevated — common in a new cell that hasn't completed a break-in cycle — that capacitor recharge pulls the cell voltage down momentarily. The camera body can read this dip as low battery, slowing the recycle rate or blocking the next flash entirely. Run one full charge-discharge cycle in the body first, and the internal resistance drops enough to support normal flash recharge current.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the SVP display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSVP camera firmware maps percentage readouts to fixed voltage thresholds calibrated for the original cell's discharge curve. A replacement cell with a slightly different discharge profile hits those thresholds at different points, causing the indicator to jump — for example, from 80% to 40% with no heavy use in between. This isn't a fault with the cell itself; it's the indicator misreading the new curve. Complete two full charge cycles inside the camera body, and the BMS will track the actual curve more accurately. If jumping persists, check that the contacts are clean and seated — a resistance at the contact point causes the same voltage sag the firmware misreads as rapid discharge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333855707226,"sku":"BWCS-NP40FU-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333855739994,"sku":"BWCS-NP40FU-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333855772762,"sku":"BWCS-NP40FU-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP40FU-1.webp?v=1778213292","url":"https:\/\/batteryweb.com\/products\/svp-cdc-650-replacement-battery-37v-850mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}