{"product_id":"svp-hddv-2600blk-replacement-battery-37v-1050mah-li-ion","title":"SVP HDDV-2600Blk Compatible Battery 3.7V 1050mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSVP HDDV-2600Blk \/ HDDV-3000 Series — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1050mAh Li-ion cell replaces the original battery in SVP compact camcorders and digital cameras including the HDDV-2600Blk, HDDV-3000, HDDV-3000B, and T-1000 series. It matches the OEM voltage rail and physical footprint — 53.20 × 35.30 × 7.10mm — so it seats and connects exactly as the original did. Capacity is 1050mAh (3.89Wh), consistent with the factory specification for these models.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHDDV and T-1000 platform fit:\u003c\/strong\u003e\n    These SVP models share the same 3.7V single-cell Li-ion architecture and connector pinout, which is why one cell covers the range. The BMS in each camera body monitors cell voltage through the same contact arrangement — no rewiring or adapter needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a bench rig replicating the SVP camera load profile. The BMS accepted the cell without fault codes, and voltage under load held within the acceptable window throughout the discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle in-body:\u003c\/strong\u003e\n    On first install, run one full charge directly inside the camera body rather than a standalone charger. Some SVP BMS firmware maps battery-remaining percentage to a charge curve calibrated during an in-body cycle — skipping this can cause the indicator to read inaccurately from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera BMS rejecting the replacement cell on first install\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eSVP camera bodies run a voltage handshake when a new cell is inserted. If the resting voltage of a replacement cell sits outside the narrow window the BMS expects on first contact, the camera may display a battery error or simply not power on. This is not a faulty cell — it is a threshold check. Insert the battery, place the camera on charge via its OEM cable or charger, and allow it to complete one full charge cycle before attempting to power on for use. After that cycle the BMS registers the cell and normal operation resumes.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the camera's fuel gauge is mapping voltage thresholds from its original cell discharge curve onto a new cell with a slightly different curve shape. The camera reads the same voltage but translates it to a different percentage, causing sudden jumps — often from 80% to 20% with no warning. The fix is to run two or three full discharge-and-charge cycles through the camera body. After that the fuel gauge recalibrates against the actual discharge behaviour of the new cell and the readout stabilises. Target a full charge to 4.2V before each session until the display tracks smoothly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333912756314,"sku":"BWCS-NP60FU-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333912789082,"sku":"BWCS-NP60FU-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333912821850,"sku":"BWCS-NP60FU-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP60FU-1.webp?v=1778213591","url":"https:\/\/batteryweb.com\/products\/svp-hddv-2600blk-replacement-battery-37v-1050mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}