{"product_id":"svp-xthinn-8061-replacement-battery-37v-600mah-li-ion","title":"SVP NP-900 Sony Alpha Compatible Battery 3.7V 600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSVP XTHINN 8061 \/ XTHINN 706 — 3.7V Li-ion Replacement Battery (2491-0015-00)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 600mAh (2.22Wh) lithium-ion replacement cell for the SVP XTHINN 8061 and XTHINN 706 compact digital cameras. It matches the OEM voltage rail and physical dimensions (43.70 × 31.30 × 7.00mm) of the original 2491-0015-00 cell. Cross-compatible part numbers include BLi-269 and the 02491-0026 and 02491-0037 series.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXTHINN 8061 and 706 platform fit:\u003c\/strong\u003e\n    Both camera bodies share the same battery bay dimensions and 3.7V input rail, which is why a single cell covers both models. The BMS in each body reads the same voltage thresholds, so the replacement cell communicates charge state the same way the original does.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the XTHINN 8061 body using the OEM charger. The BMS accepted the cell without a rejection flag, held a stable voltage curve through discharge, and triggered the low-battery warning at the expected threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install charge cycle on the XTHINN 8061:\u003c\/strong\u003e\n    Run the first full charge inside the camera body or with the OEM charger — not a generic USB adapter. Some SVP camera BMS firmware needs a complete charge cycle from the OEM source before the battery-remaining indicator maps correctly to the new cell's discharge curve.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera showing dead battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe XTHINN 8061's battery indicator maps percentage to voltage thresholds calibrated to the original cell's discharge curve. A new third-party cell can discharge at a slightly different rate across that same voltage window, causing the indicator to read empty while usable charge remains. This is a display calibration issue, not a fault with the cell itself. One full charge-discharge cycle inside the camera body usually re-aligns the indicator — end the cycle when the camera shuts off from low battery, then charge to 4.2V before shooting again.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSVP camera body rejecting the replacement cell on first install\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSome XTHINN bodies perform a BMS handshake on power-up that can return a no-battery or incompatible flag when a new cell hasn't been through a charge cycle yet. This isn't an authentication lock — it's a voltage-state check. Insert the cell, connect the OEM charger, and let it complete a full charge before powering the camera on. If the flag persists after one full charge cycle, check that the cell contacts are clean and seated flat — the narrow 7.00mm profile means even slight misalignment breaks the circuit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333825364058,"sku":"BWCS-NP900-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333825396826,"sku":"BWCS-NP900-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333825429594,"sku":"BWCS-NP900-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP900-1.webp?v=1778213259","url":"https:\/\/batteryweb.com\/products\/svp-xthinn-8061-replacement-battery-37v-600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}