{"product_id":"swyx-d210-replacement-battery-37v-650mah-li-ion","title":"Swyx D210 Replacement Battery 3.7V 650mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSwyx D210 \/ D215 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 650mAh Li-ion replacement battery for the Swyx D210 and D215 cordless DECT handsets. It slots into the handset battery compartment and restores wireless operation away from the base station. Voltage and cell dimensions match the original: 47.00 × 34.00 × 4.60mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eD210 and D215 compatibility:\u003c\/strong\u003e\n    Both handsets share the same battery bay dimensions and 3.7V supply rail. The connector orientation and BMS communication protocol are identical across the two models, so one cell covers both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the D210 base station. The BMS accepted the charge handshake without fault, and the protection circuit tripped correctly at the low-voltage cutoff threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol on DECT handsets:\u003c\/strong\u003e\n    After fitting this battery, seat the handset in the base and leave it for a full 16 hours before use. Li-ion cells shipped at partial state-of-charge need a complete slow charge to reach rated capacity — pulling the handset early on the first cycle leaves usable charge on the table.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after a new battery fits cleanly\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA Li-ion cell that has sat in storage can have elevated internal resistance even when new. That resistance causes the BMS to read voltage as lower than actual cell state under the RF transmit load, triggering a premature cutoff. Running two or three full charge-discharge cycles through the base station brings internal resistance down to normal operating levels. After three cycles, measured talk time should stabilise at rated capacity.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge light after fitting a new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eStorage discharge can drop a new Li-ion cell below the minimum acceptance voltage the D210 base station expects before initiating a charge cycle. The base reads the cell as absent or faulty and shows no indicator. Connect the handset to the base and wait up to 20 minutes — the charger circuit will trickle-charge the cell until it crosses the acceptance threshold, typically around 3.0V, at which point the normal charge indicator activates.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339981783130,"sku":"BWCS-ERT390CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339981815898,"sku":"BWCS-ERT390CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339981848666,"sku":"BWCS-ERT390CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ERT390CL-1.webp?v=1778367002","url":"https:\/\/batteryweb.com\/products\/swyx-d210-replacement-battery-37v-650mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}