{"product_id":"sylvania-st88201-replacement-battery-36v-700mah-ni-mh","title":"Sylvania ST88201 Cordless Phone Replacement Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSylvania ST88201 \/ ST88207 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 700mAh Ni-MH battery for Sylvania cordless phone models ST88201 and ST88207. It replaces the original handset battery when talk time drops or the handset stops holding a charge. Dimensions are 50.79 × 42.40 × 14.23mm — confirm against your existing pack before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eST88201 and ST88207 compatibility:\u003c\/strong\u003e\n    Both models run the same 3.6V handset power rail with the same connector and cell footprint, so one battery covers both. No modifications needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack on a DECT handset base and confirmed the NiMH charge controller accepted the pack without error and reached full charge voltage across multiple cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless phones need a slow initial charge to reach rated capacity — skipping this leaves you with noticeably shorter talk time from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells arrive partially discharged from storage. The first two to three cycles will deliver less than rated capacity — this is normal cell chemistry, not a fault with the battery. Each full charge and discharge cycle allows the cells to reach closer to the rated 700mAh. By cycle four or five, talk time should match or beat the old pack. Run full cycles: charge to completion in base, use until the handset signals low battery, then recharge.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station charge light not activating after new battery installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH batteries sitting in warehouse storage can drop to a voltage the base charge circuit interprets as a fault rather than a depleted cell. Some Sylvania base stations require a minimum voltage on the handset contacts before the charge cycle starts. If the charge indicator stays off, remove the battery, wait 30 seconds, reinstall it firmly, and reseat the handset. If the base still shows no activity, connect the base to power for 60 seconds with the handset removed, then reseat — this resets the charge detection circuit and typically resolves the issue.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340080676954,"sku":"BWCS-P501CL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340080709722,"sku":"BWCS-P501CL-2","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340080742490,"sku":"BWCS-P501CL-3","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P501CL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/sylvania-st88201-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}