{"product_id":"symbol-barcode-scanner-replacement-battery-74v-3400mah-li-ion","title":"Symbol 29518 Barcode Scanner Compatible Battery 7.4V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSymbol Barcode Scanner — 7.4V Li-ion Replacement Battery (29518)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 3400mAh Li-ion battery replaces the original pack in Symbol handheld barcode scanners used in retail, logistics, and warehouse environments. It matches OEM part numbers 29518, 38403, 46607, 52030, C8872A, and EI-D-LI1. Voltage, cell configuration, and BMS communication profile match the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMulti-part-number coverage:\u003c\/strong\u003e\n    Symbol used several part numbers across scanner variants and refresh cycles — 29518, 38403, 46607, 52030, C8872A, and EI-D-LI1 all share the same 7.4V cell stack, connector pinout, and BMS handshake protocol. One replacement covers the range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge, idle, and sustained scan-cycle loads. The BMS held voltage within the expected band under continuous trigger use and passed the scanner's internal pack authentication check without error.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use cycle tip:\u003c\/strong\u003e\n    After installing, run a full scan session to drain the pack below the scanner's low-battery threshold before recharging. Symbol scanners calibrate their fuel gauge to the new cell capacity during the first full discharge-recharge cycle — skipping this step causes the low-battery alert to trigger early and inaccurately on subsequent shifts.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy Symbol scanners throw a battery error immediately after a new pack is inserted\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eSymbol scanners run an authentication handshake with the battery BMS at power-on. If the pack has been in storage, the cell voltage may have dropped below the BMS's active-communication threshold — typically around 6.8V on a 7.4V nominal pack. The scanner reads no valid BMS response and flags a battery fault rather than a low-charge warning. Placing the pack in the cradle charger for 15–20 minutes before inserting it into the scanner allows the BMS to wake and respond correctly to the handshake.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner shuts off mid-session despite showing adequate charge on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the scanner's displayed charge percentage is based on a fuel gauge that hasn't recalibrated to the new pack's actual capacity. The voltage reading looks acceptable at rest, but under the sustained current draw of rapid sequential scans, voltage sags below the BMS's cutoff threshold and the unit shuts down. The fix is to complete one full discharge-recharge cycle after installation so the scanner resets its voltage-to-percentage map. After that cycle, the displayed percentage will track actual remaining capacity accurately.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360754991194,"sku":"BWCS-LI1HL-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360755023962,"sku":"BWCS-LI1HL-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360755056730,"sku":"BWCS-LI1HL-3","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI1HL-1.webp?v=1778616259","url":"https:\/\/batteryweb.com\/products\/symbol-barcode-scanner-replacement-battery-74v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}