{"product_id":"systronik-5230191-replacement-battery-37v-1800mah-li-ion","title":"Systronik 523019.1 Survey Battery 3.7V 1800mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSystronik 523019.1 \/ 23019 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 1800mAh (6.66Wh) lithium-ion battery for the Systronik 523019.1 and 23019 portable survey and test instruments. It replaces the original pack in field instruments used for surveying, testing, and measurement work. Swap it in when the original cell no longer holds a usable charge between field sessions.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e523019.1 and 23019 platform fit:\u003c\/strong\u003e\n    Both model numbers share the same 3.7V single-cell architecture and connector arrangement. The BMS on these instruments expects a cell that matches the original voltage floor and charge termination profile — this pack meets those parameters.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on survey instrument hardware. The BMS accepted the pack without fault codes, held the voltage rail steady under sustained sensor load, and terminated charge cleanly at full capacity.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration step:\u003c\/strong\u003e\n    After fitting this battery, run a full calibration cycle through the instrument menu before heading into the field. The instrument maps battery state during calibration — skip this and it will throw premature low-battery warnings on your first measurement session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after a Systronik instrument sat unused in a carry case for months\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge slowly during storage. If a Systronik 523019.1 sits in a case for several months, the cell can drop below the BMS recovery threshold — typically around 2.5V for a 3.7V nominal cell. At that point the BMS enters a protective sleep state and the instrument will not power on or accept a charge. A dedicated lithium charger with a recovery or \"boost\" mode can push the cell back above the reinitialisation threshold. Once voltage climbs above approximately 2.8V, the BMS wakes and standard charging resumes normally.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eVoltage dropout causing readings to reset or drift during a logging session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSustained sensor load draws continuous current from a single 3.7V cell. If the cell is aged or partially discharged, voltage sags under that load — even briefly — and the instrument's microcontroller resets, interrupting the logging session or corrupting a data string. This is not a firmware fault; it is a cell that can no longer maintain voltage under load. Check resting voltage before a long session — a healthy cell at rest should read above 3.9V. Replace the pack if resting voltage is below 3.7V before the session starts.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360470401114,"sku":"BWCS-SRK520SL-1","price":48.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360470433882,"sku":"BWCS-SRK520SL-2","price":57.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360470466650,"sku":"BWCS-SRK520SL-3","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SRK520SL-1.webp?v=1778615901","url":"https:\/\/batteryweb.com\/products\/systronik-5230191-replacement-battery-37v-1800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}